• Home
• Brands
• Dell Manuals
• Dell PowerConnect W-AP134
• Dell W-AP134 Specifications

Dell W-AP134 Specifications

Download Specifications of Dell PowerConnect W-AP134 Switch, Wireless Access Point for Free or View it Online on All-Guides.com.

1

2

3

4

Specifications

Operating mode

• Multiservice concurrent 802.11a/n + b/g/n

• Backward compatible with 802.11a/b/g and mixed mode

802.11a/b/g/n deployments

• Can be congured to operate individually or simultaneously as:

- 802.11a/b/g/n access point

- Air monitor, spectrum monitor

- Remote AP

- Secure enterprise mesh

Radios

• Multifunction, dual radio capable of 2.4 and 5GHz operation

• Both 802.11n radios implement 3x3 MIMO with up to three

spatial streams, providing up to 450Mbps data rate per radio

• Maximum ratio combining (MRC) for improved receiver

performance

Wireless radio specications

• AP type: Dual-radio, dual-band 802.11n indoor

• Supported Frequency Bands (country-specic restrictions ap-

ply):

- 2.400–2.4835GHz

- 5.150–5.250GHz/5.250–5.350GHz/5.470–5.725GHz/5.725–

5.850GHz with Dynamic Frequency Selection (DFS) capability

• Available Channels: Controller-managed, dependent upon

congured regulatory domain Supported Radio Technologies:

- 802.11b: Direct-sequence spread-spectrum (DSSS)

- 802.11a/g/n: Orthogonal frequency division multiplexing

(OFDM)

- 802.11n: 3x3 MIMO with up to three spatial streams

• Supported Modulation Types:

- 802.11b: BPSK, QPSK, CCK

- 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM

• Maximum Transmit Power (aggregated for three active transmit chains):

- 2.4GHz: up to 23dBm (limited by local regulatory requirements)

- 5GHz: up to 23dBm (limited by local regulatory requirements)

• Association Rates (Mbps):

- 802.11b: 1, 2, 5.5, 11

- 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54

- 802.11n: MCS0—MCS23 (6.5 to 450Mbps)

• 802.11n High-Throughput (HT) Support: HT 20/40

• 802.11n Packet Aggregation: A-MPDU, A-MSDU

Antenna

• AP-134: Three RP-SMA antenna interfaces for external dual-band

antennas. (External antenna selection guide is available from Dell

representative or downloadable from Dell.com/wireless).

• AP-135: Six internal downtilt omni-directional antennas; three

per frequency band

- 2.4 to 2.5GHz/3.5dBi

- 5.150 to 5.875GHz/4.5dBi

Power

• 48V DC 802.3af PoE or 802.3at PoE+

• 12V DC external AC supplied power (adapter sold separately)

• Maximum power consumption: 15 watts

Interfaces

• Network:

- 2 x 10/100/1000Base-T Ethernet (RJ45), auto-sensing, MDI/MDX

• Power:

- 1 x DC power connector

• Other:

- 1 x RJ45 console interfaceMounting

Mounting

• Standard:

- Wall mounting using built-in mount features

- Recessed ceiling-tile rail mounting using one of two adapters

supplied with the AP (9/16” and 15/16” rails)

Mechanical

• Dimensions/Weight:

- 170 mm x 170 mm x 45 mm (6.69" x 6.69" x 1.77")

- Unit: 760 g (1.68lb)

Environmental

• Operating:

- Temp: 0° C to +50° C (+32° F to +122° F)

- Relative humidity: 5 to 95% non-condensing

• Storage and transportation temperature range:

- Temp: -40° C to +70° C (-40° F to +158° F)

Certications/Regulatory

• Wi-Fi certied: 802.11a/b/g/n

• FIPS/TAA certied SKU available

Product meets EMC, safety and wireless standards of over 50

countries inclusive of; USA (FCC), Canada, EU, Japan, Korea,

China. For more country-specic regulatory information, and

approvals, please see your Dell representative.

Minimum OS Version

• 6.1.1.0

Extended Life Warranty*