• Home
• Brands
• Dell Manuals
• Dell External USB PAL
• Dell External USB PAL Safety Instructions

Dell External USB PAL Safety Instructions

Download Safety instructions of Dell External USB PAL TV for Free or View it Online on All-Guides.com.

1

2

3

4

5

6

7

8

9

10

11

12

Back to Contents Page

Setup:Dell™ExternalUSBPAL/SECAM/DVB-T TV Tuner User’s Guide

Hardware Installation

Driver Installation

LED Status Indicator Light

Hardware Installation

1.Connecting the Dell External USB PAL/SECAM/DVB-T TV Tuner device

a. Identify any available USB 2.0 port on the computer.

b. Remove the Dell External USB PAL/SECAM/DVB-T TV Tuner from its packaging.

c. Connect the supplied USB cable from the Dell External USB PAL/SECAM/DVB-T TV Tuner to the USB computer port as shown.

2. Connecting a TV cable

Connect a TV cable (not included) from the wall or antenna to the TV IN connector on the rear panel of the Dell External USB PAL/SECAM/DVB-T TV Tuner.

3. Connecting a cable box or satellite receiver (set-top box)

a. Connect either a composite video cable or an S-video cable (1. cables not included) from the cable TV box or satellite receiver (3.) to the Video or S-

Video connector on the front panel of the Dell External USB PAL/SECAM/DVB-T TV Tuner (4.).

b. Connect the audio cables (2. cables not included) from the cable TV box or satellite receiver (3.) to the Audio Left and Audio Right connectors on the

front panel of the Dell External USB PAL/SECAM/DVB-T TV Tuner (4.).

If you have a second TV signal input source and a second Dell External USB PAL/SECAM/DVB-T TV Tuner, repeat the hardware installation steps using the

connectors on the second Dell External USB PAL/SECAM/DVB-T TV Tuner.

Note: Follow the hardware installation steps before installing the driver.

CAUTION: Shut down your computer and unplug the power cord to prevent any personal or equipment damage.

Note: If you have a cable box or satellite receiver (set-top box), skip this step.