Delta 31-260X Instruction Manual
Download Instruction manual of Delta 31-260X Sander for Free or View it Online on All-Guides.com.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
4
1. DO NOT OPERATE THIS TOOL UNTIL it is assembled
and installed according to the instructions.
2. OBTAIN ADVICE from your supervisor, instructor, or
another qualified person if you are not familiar with the
operation of this tool.
3. FOLLOW ALL WIRING CODES and recommended
electrical connections.
4. COVER POWER TAKE-OFF SHAFT when not using
accessories. Unguarded rotating shafts can create an
entanglement hazard which can result in injury.
5. USE A DUST COLLECTION SYSTEM with this tool.
6. CAUTION: THIS MACHINE IS DESIGNED TO SAND
WOOD or wood-like products only. Sanding or grinding
metal could result in fire, injury, and/or damage to the
product.
7. CHECK THE TABLE BELT TRACKING to prevent belt
run-off.
8. CHECK BELTS FOR WEAR and for tension.
9. CLEAR THE SANDING AREA and infeed/ outfeed
tables of all objects (tools, scrap pieces, etc.) prior to
starting tool.
10. DO NOT sand pieces of material that are shorter than 7"
in length or thinner than 1/32".
11. SUPPORT ALL SANDING WORKPIECES with a table
or additional support at table height. Curved work on an
outer sanding drum is the only exception.
12. DRESS PROPERLY. DO NOT WEAR LOOSE CLOTHING
OR JEWELRY. CONTAIN LONG HAIR. KEEP YOUR
HAIR, CLOTHING, AND GLOVES AWAY FROM MOVING
PARTS. Loose clothes, jewelry, or long hair can be caught
in moving parts.
13. PREVENT THE WORKPIECE FROM CONTACTING THE
SANDING BELT before starting the tool.
14. AVOID AWKWARD HAND POSITIONS. A sudden slip
could cause a hand to contact the sanding belt.
15. NEVER WEAR GLOVES or hold the work with a rag
when sanding.
16. HOLD THE WORK FIRMLY when sanding.
17. SAND with the grain of the wood
18. FEED WORK against the drum rotation.
19. NEVER perform layout, assembly, or set-up work on the
tables when the tool is operating.
20. DISCONNECT THE TOOL from the power source before
installing or removing accessories, before adjusting or
changing set-ups, or when making repairs.
21. DISCONNECT THE TOOL from the power source, and
clean the table/work area before leaving the tool. LOCK
THE SWITCH IN THE "OFF" POSITION to prevent
unauthorized use.
22. ADDITIONAL INFORMATION
regarding the safe
and proper operation of power tools (i.e. a safety
video) is available from the Power Tool Institute, 1300
Sumner Avenue, Cleveland, OH 44115-2851 (www.
powertoolinstitute.com). Information is also available from
the National Safety Council, 1121 Spring Lake Drive, Itasca,
IL 60143-3201. Please refer to the American National
Standards Institute ANSI 01.1 Safety Requirements for
Woodworking Machines and the U.S. Department of
Labor OSHA 1910.213 Regulations.
ADDITIONAL SPECIFIC SAFETY RULES
SAVE THESE INSTRUCTIONS.
Refer to them often and use them to instruct others.
POWER CONNECTIONS
A separate electrical circuit should be used for your machines. This circuit should not be less than #12 wire and should be
protected with a time delay fuse. NOTE: Time delay fuses should be marked "D" in Canada and "T" in the US. If an extension
cord is used, use only 3-wire extension cords which have 3-prong grounding type plugs and matching receptacle which will
accept the machine’s plug. Before connecting the machine to the power line, make sure the switch (s) is in the "OFF" position
and be sure that the electric current is of the same characteristics as indicated on the machine. All line connections should
make good contact. Running on low voltage will damage the machine.
Do not expose the machine to rain or operate the machine in damp locations.
MOTOR SPECIFICATIONS
Your machine is wired for 120 volt, 60 HZ alternating current. Before connecting the machine to the power source, make sure
the switch is in the "OFF" position.
GROUNDING INSTRUCTIONS
This machine must be grounded while in use to protect the operator from electric shock.
Failure to follow these rules may result in serious personal injury.