DELTA DORE RADIO TYBOX User Manual
Download Operation & user’s manual of DELTA DORE RADIO TYBOX Thermostat for Free or View it Online on All-Guides.com.
Brand: DELTA DORE
Category: Thermostat
Type: Operation & user’s manual for DELTA DORE RADIO TYBOX
Pages: 2 (2.22 Mb)
1
2
RADIO TYBOX
User guide
Wireless programmable thermostat
1-zone pack or 2-zone pack
RADIO TYBOX
*2702001_rev1*
Device compliant with the requirements of directives:
R&TTE 1999/5/CE
Because of changes in standards and equipment, the characteristics
given in the text and the illustrations in this document are not binding
unless confirmed by Delta Dore.
• Carefully read these instructions prior to use.
• Do not attempt to repair the unit yourself;
an after-sales service is available.
Warnings
Off mode
Absence mode
Timer mode
Automatic mode
Time setting
Programming
Set-point temperature
adjustment
Continuous mode
Modification
buttons
Selector
knob position
Selector
knob
RADIO TY
BOX
Presentation
This manual is for the RADIO TYBOX transmitter.
1-zone pack (1 transmitter)
2-zone pack (2 transmitters)
This thermostat lets you program your heating system
to Comfort or Economy mode.
Override
In automatic mode, override is used to switch from
Comfort to Economy mode (or conversely) until the
next program change.
Press the override button
6:00 8:00
00:0000:00
17:0015:30 23:00
Override
currently active
At 17:00, the program will
return to its usual program
.
To cancel the current override,
press the button once more.
E.g. It is 15:30 and you would like to switch to Comfort
mode before the set time (17:00).
Current day programming
Turn the knob to AUTO.
Your thermostat will function according to the program.
Automatic mode
Override
Information
button
Display in automatic mode
Time
Current day
Room
temperature
Current mode
Current day
programming
Heating
demand mode
NOTE: Depending on the configuration during
installation, your unit will continuously display the
set-point temperature or the room temperature.
To change these settings, refer to the “installation
guide”, or contact our customer service department
or your installer.
This mode is used to choose a set-point temperature
for a given amount of time. Turn the knob to .
To make changes to the current timer mode,
press OK once more.
To cancel the current timer mode, turn the knob.
Continuous mode
Choice of set-point
temperature (from 5 to 30°C)
Set-point
temperature
Confirm
Modification of the set-point
temperature
This mode is used to choose a set-point temperature
that remains constant.
Turn the knob to .
Timer mode
Set-point temperature setting (from 5 to 30°C)
Confirm
Return to AUTO mode at
the end of the countdown
Confirm
Adjustment of the duration from 15 minutes
to 72 hours (in increments of 15 minutes)
To exit this mode, turn the knob.
This mode lets you place your home under Frost
Protection if you need to leave for several days.
Turn the knob to .
To make changes to the current absence mode,
press OK once more.
This mode shuts down your heating system.
Turn the knob to .
Off Mode
Room
temperature
Return to AUTO mode at
the end of the countdown
Set-point temperature setting (from 5 to 15°C)
Confirm and start the calendar countdown.
Confirm
Adjustment of the number of days (1 to 365)
E.g. For a departure on 1 March and a return
on 16 March, program 15 days of absence.
Automatic operation will resume on
16 March at midnight.
Absence mode
Turn the knob to .
The days flash.
Press + or - to change the day, then press OK to
confirm and continue on to the next setting.
Repeat the operations to set the hours and minutes.
To leave the “time setting” mode, turn the knob.
Minutes
Hours
Days
(1 : Monday ...
7 : Sunday)
Time setting
NOTE: If the unit is configured for a daily program,
the days setting is not offered.
Set-point temperature setting
Turn the knob to .
To exit this mode, turn the knob.
Comfort set-point temperature setting
(from 5 to 30°C in increments of 0.5°C)
Confirm
Go on to temperature setting
Economy
Adjustment of the Economy temperature
setting (from 5 to 30°C)
Confirm
Depending on the system configuration (menu 1-08),
“conf” may be displayed for the set-point
temperature.
This set-point temperature cannot be modified.
If this is the case, the Comfort set-point temperature
can be adjusted on your heat emitter (convector, panel
heater, thermostatically controlled valve, etc.).
Press and hold
until you reach 06:00
Press and hold
until you reach 08:00
Press and hold
until you reach 17:00
Press and hold
until you reach 23:00
Press and hold
until you reach 00:00
Copy and confirm
or confirm
E.g. Comfort from 6:00 to 8:00 and from 17:00 to 23:00
6:00 8:00
00:0000:00
17:00 23:00
Programming
Turn the knob to PROG.
The default program is a Comfort period from
6:00 to 23:00.
1. Creating your program
Programming starts on day 1 at midnight.
Press the or buttons to create different Economy
or Comfort periods.
2. Confirming and copying the program
Press and hold the OK button for 3 seconds to confirm
the program you created and copy it to the next day.
3. Confirming the program
Press the OK button to confirm and continue on to the
next day to program it separately.
Day
1st time
slot
Comfort period
adjustment
Economy period
adjustment
OR
Checking your program
Press the button repeatedly to check the accuracy
of the Comfort and Economy periods you created.
Press
OK to check the next day.
Exiting the programming mode
Turn the knob to another mode.
Program
profile
Verification
of the different
or periods
Time slot
consulted
NOTE: Depending on the configuration made during
installation, programming can be weekly or daily.
Likewise, this programming may be done in increments
of one hour, 30 minutes, or 15 minutes. To change these
settings, refer to the “installation guide”, or contact our
customer service department or your installer.