Xerox 5760 Specification Sheet
Download Specification sheet of Xerox 5760 All in One Printer, Copier for Free or View it Online on All-Guides.com. This version of Xerox 5760 Manual compatible with such list of devices, as: 5760, Phaser 790/N, Phaser 790DP, WorkCentre 5765, WORKCENTRE 5790
Brand: Xerox
Category: All in One Printer , Copier , Office Equipment , Printer , Server
Type: Specification sheet
Model: Xerox 5760 , Xerox Phaser 790/N , Xerox Phaser 790DP , Xerox WorkCentre 5765 , Xerox WORKCENTRE 5790
Pages: 1 (0.01 Mb)
1
The Document Company Document # 100492
XEROX
Xerox One Step Image Transfer Paper
Instructions
Majestik 5760/5765 Digital Color Copiers/Printers
Regal 5790 Digital Color Copier/Printer
DO NOT USE in 5775 or 4700 - Will cause immediate machine damage.
Storage:
•
Optimum image quality is achieved with relative humidity less than 70%. High humidity levels can
cause poor image quality due to dampness in the paper. For best results, return unused paper to
original packaging with desiccant pack.
Copying: •
Use MSI By-Pass Tray
•
The imaging side (blank) is placed face up in tray
•
8.5” x 11” Sheets feed Long Edge
•
11” x 17” Sheets feed Short Edge
•
Fan sheets prior to loading
•
Recommended maximum tray quantity
•
8.5” x 11” 30 sheets
•
11” x 17” 20 sheets
•
Use Mirror Image Setting in Edit / Special mode so image will be right reading after transfer to fabric.
•
Set machine as you normally would for the type of original used i.e. Photo, Text
•
If poor fusing is experienced in 5760/5765 or 5790, use Heavy Weight Paper Mode.
Heavy Weight Paper Mode is not selectable for 11 x 17” size in 5760/5765.
•
For adequate fusing when printing electronic images, insure total toner saturation is less than 280%.
Pressing: Note: A swing-away heat press is required for acceptable image transfer. The clam-shell type presses
are not recommended. A conventional home iron will not give satisfactory image transfer.
•
Set temperature to 350 - 375
°
F
•
Set to maximum workable pressure (approx. 40 lbs of pressure)
IMPORTANT: To ensure even pressure, create a fabric cushion using 2 or 3 T-shirts on top of heat press bed.
•
Position and press fabric item for 2 - 3 seconds to remove wrinkles and moisture
•
Position transfer paper on fabric item and press for 8 -10 seconds (T-shirts).
Heavy fabrics like Sweatshirts may require 25-30 sec. pressing time.
• Peel off transfer paper immediately (peel while hot)
Washing: • Turn garment inside out. Machine wash in warm or cold water.
• Do not use fabric softener or bleach.
• Tumble dry on low setting. Do not dry clean!
• To brighten image on fabric after washing, press with an iron on medium setting
.
Fabrics: • Best performance is obtained on cotton, polyester, poly/cotton 50/50 blends
and untreated canvas. Tight knits (heavy T-shirts) provide better results than open knits
(sweat shirts).
_______________________________________________________________________________________________________________________________
Reordering: • Call Xerox Supply Net 1-800-822-2200
• 3R5811 for 8.5” x 11” (216mm x 279mm) 3R5812 for 11” x 17” (279 x 432mm)