• Home
• Brands
• Digital Spectrum Manuals
• Digital Spectrum MemoryFrame MF-8000
• Digital Spectrum MemoryFrame MF-8000 User Manual

Digital Spectrum MemoryFrame MF-8000 User Manual

Download Operation & user’s manual of Digital Spectrum MemoryFrame MF-8000 Digital Photo Frame for Free or View it Online on All-Guides.com.

1

Take a moment to examine the unit. On the left side you will see

two fixed tabs, these are what will hold the frame in place. On the

right side you will see one spring tab. This is what is used to

remove and replace the frames.

The spring tab is

operated by pulling

back on the spring

lever on the back of

the unit. This allows

the spring tab to

retract before

positioning the

frame.

Position the frames groove over the fixed lugs

Make sure the groove sits tightly over the lugs

Changing the frame on the

MemoryFrame 8000 & 8104

Before trying to place the frame on the unit please read

these instructions

To complete placing the wooden frame onto the unit, pull back

on the spring lever as shown below. This allows the spring tab

to retract.

With the spring tab retracted lower the frame onto the unit Make sure the frame fits snuggly before releasing the spring lever.

This will allow the spring tab to fit into the groove on the frame.

When fitting the frame make sure the two fixed tabs are positioned

to slide into the grove on the wooden picture frame.

Positioning the frame

Make sure the tabs fit the groove

Operating the spring lever

Placing the frame

Fitting the frame snugly Removing the frameFitting the frame

1 2 3

4

5 6 7 8

Removal and replacement is easy, just pull back on the spring

lever to release the frame.

Groove

Fixed tabs

Fixed tabs

Spring tab

Spring lever

The frame should then fit snugly to the unit

Spring tab

Spring lever