DLS UR 1 Ultimate series Quick User Manual

Download Quick user manual of DLS DLS UR 1 Ultimate series Speakers for Free or View it Online on All-Guides.com.

Brand: DLS

Category: Speakers

Type: Quick user manual for DLS DLS UR 1 Ultimate series

Pages: 1 (0.47 Mb)

Download DLS DLS UR 1 Ultimate series Quick user manual

DLS DLS UR 1 Ultimate series Quick user manual - Page 1
1
A
B
D
C
E
F
G
DLS UR 1, Ultimate series tweeteer
THE KIT CONTAINS:
- 2 pcs 28 mm / 1,1" tweeter elements
- Mounting accessories for dash and recessed
mounting
Thank you for buying DLS UR1 tweeter. This tweeter is included
in the DLS ULTIMATE Reference speaker kits.
DLS Svenska AB
P.O. Box 13029
S-402 51 Göteborg, Sweden
Tel. +46 31 840060
Fax +46 31 844021
www.dls.se
If you have any questions about this product, contact
your local dealer or DLS customer support center.
Art.no 10-25401
Size 28 mm
Nom. power (RMS) 50 Watts (80 Watts max)
Freq. range 1 kHz-25 kHz
Sensitivity 93 dB
Fs 900 Hz
Overall dimensions 62 mm / 2,44"
Magnet 28 mm / 1,1" neodymium
Mounting depth 26 mm / 1"
Mounting hole 45 mm / 1,77"
Cone material Hand treated fabric
FACTS ABOUT DLS UR 1
RECESSED MOUNTING 1:
You need a hole with a diameter of
45 mm / 1,77" in the door side.
Attach the tweeter element (G) to
the door side with the round holder
(C) on the back side of the door pa-
nel. Use the three long screws (F)
to attach the element to the holder.
SURFACE MOUNTING:
INSTALLATION:
UR1 can be installed on the dashboard or recessed in a doorside.
Use all accessories coming with the tweeter.
Attach the round bottom plate (A) with the screws
(B) or double adhesive tape.
The fasten the round holder (C) to the bottom plate
using the screw and nut (D). The tweeter element
(G) is then attached to the holder using the three
short screws (E).
Tack för att du köpt DLS UR 1 tweeter. Den ingår som standard i
DLS ULTIMATE Reference högtalarsystem.
INNEHÅLL:
- 2 st 28 mm tweeterelement
- Monteringstillbehör för yttre och infälld montering
MONTERING:
Iridium1 kan antingen monteras utanpåliggande på instrument-
bräda, eller infällt i ex.vis en dörrsida.
UTANPÅLIGGANDE MONTERING:
Använd alla de tillbehör som finns i förpackningen.
Den runda bottenplattan (A) monteras med två
skruv (B) eller dubbelhäftande tape. Den runda
hållaren (C) monteras ihop med bottenplattan med
medfljande skruv och mutter (D). Tweeterelementet
(G) fästs i den runda hållaren med tre korta skruv
(E).
INFÄLLD MONTERING 1:
Gör ett hål på 45 mm i dörrsidan. Den
runda hållaren (C) monteras på dörr-
sidans baksida. Använd de tre långa
skruvarna (F) för att skruva fast
tweetern (G) med hållaren (C).
Art.nr 10-25401
Storlek 28 mm
Nom. effekt (RMS) 50 Watt (80 Watt max)
Frekvensområde 1 kHz-25 kHz
Känslighet 93 dB
Fs 900 Hz
Yttre mått 62 mm
Magnet diameter 28 mm neodymium
Monteringsdjup 26 mm
Monteringshål 45 mm
Konmaterial Textilmaterial
FAKTA OM DLS UR 1
DLS Svenska AB 05-02-24
INFÄLLD MONTERING 2:
Ibland är det önskvärt att kunna montera
tweetern i bilens originaluttag eller lik-
nande och då är flänsen onödig. Den
yttre flänsen (H) är möjlig att ta bort från
tweeterelementet (I) genom att vrida den
moturs (bajonettfattning).
Om du installerar tweetern med flänsen
monterad så erhålls bäst ljudkvalitet om
du lägger en sträng med ett starkt lim
runt om på undersidan, mellan fläns och
kammare, så att flänsen sitter fast or-
dentligt.
H
I
RECESSED MOUNTING 2:
Sometimes it´s necessary to install the
tweeter at places where you cant use the
round flange. The flange (H) is possible to
remove from the tweeter element (I) by
turning it CCW (bayonet mount).
If you prefer to install the tweeter with the
flange attached to the tweeter element,
we recommend you to add a string of
strong glue on the bottom side, between
flange and chamber, to secure it. This gi-
ves you the best sound reproduction in
this installation.