Draytek VigorSwitch P2260 Quick Start

Download Quick installation of Draytek VigorSwitch P2260 Switch for Free or View it Online on All-Guides.com.

Brand: Draytek

Category: Switch

Type: Quick installation for Draytek VigorSwitch P2260

Pages: 2 (0.04 Mb)

Download Draytek VigorSwitch P2260 Quick installation

Draytek VigorSwitch P2260 Quick installation - Page 1
1
Draytek VigorSwitch P2260 Quick installation - Page 2
2
1
Read Me First
Packing List:
Before you start installing VigorSwitch P2260, please verify that the package
contains the following items:
VigorSwitch P2260
Power Cord
CD
Console Cable
Rubber Feet
Rack Mount Kit
Please notify your sales representative immediately if any of the items is missing or
damaged.
Power Requirements: AC Line
Voltage
: 100240 VAC
Frequency
: 5060 Hz
Consumption : Max. 12W (in case no PD device connected)
: Max. 185W (up to 15.4W for 12 ports, or up to 7.7W
for 24 ports
Quick Installation:
1. Install the switch in the rack with mounting accessory.
2. Connect the switch to an AC power source.
3. The port 1–24 connector is RJ-45 jack on the switch. Use Category 5 UTP
cable to connect between the switch and end station.
4. The port 25, 26 includes two types of media --- TP and SFP fiber modules;
they support TP or fiber with auto-detected function.
5. Use RS-232 interface to pre-configure the switch for network management.
6. For example: IP address, VLAN, Port Trunking, STP, etc.
The default settings for switch’s serial port are listed as follows:
Baud rate 57600
Stop bits 1
Data bits 8
Parity N
Flow control none
The default values of the switch are listed as follows:
IP Address/Subnet Mask/Default Gateway: Assigned by DHCP Server
Username : admin
Password : admin
User also can use telnet or web to pre-configure the switch with the default IP
address and username/password in the first configuration.