Dynex DX-46L150A11 Installation Manual

Download Installation manual of Dynex DX-46L150A11 LCD TV for Free or View it Online on All-Guides.com.

Brand: Dynex

Category: LCD TV

Type: Installation manual for Dynex DX-46L150A11

Pages: 2 (0.47 Mb)

Download Dynex DX-46L150A11 Installation manual

Dynex DX-46L150A11 Installation manual - Page 1
1
Dynex DX-46L150A11 Installation manual - Page 2
2
TunerFirmwareUpdateProcessforDynexModelDX46L150A11
1. IMPORTANT: Please completely read these instructions prior to starting your
update process.
2. Determine the proper Rev id by looking at the sticker on the side of the TV (see photo
below) and write down the Model and Rev id for use later in this process.
3. Insert USB drive to your PC or Mac
4. USB drive being used must not have any folders or additional files on the device.
5. Download the firmware that matches the Model and Rev id of your TV.
6. To download firmware click on the Support/Downloads tab; then locate the
corresponding Rev id of your TV.
7. Click on the firmware link titled LC46KS70AUO.Bin when the pop up box appears
select Save and choose the destination of your USB drive.
a. Note: Do NOT change the name of the file.
b. Note: This file is <5 Megs in size; download time should be less than 1 minute.
8. Once down load is complete safely remove your USB drive.
9. Disconnect the AC power from your wall outlet for the TV
10. Insert USB device into the SERVICE PORT; located in one of 3 places, back, side or
bottom. The correct port will be labeled either Service or Service/USB. See photo below