• Home
• Brands
• EAW Manuals
• EAW CAM160
• EAW CAM160 Specification Sheet

EAW CAM160 Specification Sheet

Download Specification sheet of EAW CAM160 Amplifier for Free or View it Online on All-Guides.com.

1

2

Part No. 0019318 Rev. A 11/08

DESCRIPTION

The EAW Commercial CAM160 is an integrated audio mixer and

power amplier outtted with comprehensive input/output facilities

and feature sets to provide exceptional versatility from a highly cost-

eective package. Designed for a wide range of xed installation

applications, the CAM160 oers “all in one” functionality without

need for add-ons such as expansion modules.

The CAM160 is equipped with six actively balanced combination

mic/line inputs as well as individual adjustable potentiometers for

line level input, mic level input and mic level input with 24-volt DC

phantom power. Input 1 also oers the exibility of an integrated

transformer for connection to telephone paging systems.

Inputs 1 and 2 are divided into four discrete input sections: a

combination XLR/TRS connector, Phoenix connector, or terminal

strip. Meanwhile, Inputs 3, 4, 5 and 6 oer both Phoenix connectors

and terminal strips. Two pairs of RCA connectors allow unbalanced

auxiliary (Aux) signals to enter the amplier via Aux 1 and Aux 2,

both of which are attenuated by a potentiometer on the front of the

amplier.

Two levels of priority can be established on Inputs 1 and 2, initiated

with external contact closures or adjustable signal threshold levels.

External volume control is possible through a Phoenix connector

and user supplied potentiometer. A two-position Phoenix connector

allows the internal fault relay to be connected to redundant systems.

And, an adjustable pre-announcement chime is also included.

Front panel controls include a level control for each input, a toggle

switch for Aux 1 or Aux 2 selection, and one Aux master level control

for the selected Aux. Low and high EQ controls oers 12 dB of boost

or cut at 100 Hz and 10 kHz, respectively. A master volume control

aords output volume control, while distinctive LEDs indicate power

(green), signal (amber), overload (red), and fault (red).

The CAM160 provides 160 watts of output power at 100 volts,

70.7 volts, 25 volts and 4 Ohms. An intelligent output stage is fully

protected against permanent damage caused by overloading, shorts

and thermal faults.

The CAM160 will operate on 100 volts to 240 volts AC power (50/60

Hz), and is supplied by a detachable IEC power cord. A combination

banana plug/binding post connection is also provided for

connecting an external 24-volt DCbackup battery.

CAM160

8 INPUT x 1 OUTPUT 160 W MIXER-AMPLIFIER

• Two combination 1/4-inch/XLR/Phoenix, or barrier strip

Mic/Line inputs

• Four Phoenix connector or barrier strip Mic/Line inputs

• Selectable 24-volt phantom power

• Two stereo auxiliary inputs

• Multiple priority levels

• Transformer-balanced telephone paging on Input 1

• Signal processing loop

• Internal fault-activated relay

• External volume control

• 4-Ohm, 25-volt, 70-volt and 100-volt outputs

• Automatic changeover to 24-volt DC backup power

• Universal power supply

• UL Approved

Features

• Paging Systems • Houses of Worship

• Hotel and Ballrooms • Meeting Rooms

• Schools • Oces

• Foreground/Background Music Systems

Applications

Eastern Acoustic Works | One Main Street | Whitinsville, MA 01588 USA | TEL toll free within US/Canada 800.992.5013

TEL outside US 508.234.6158 | FAX 508.234.8251 | Page 1 of 2