Eaw DX8 Quick-start Manual

Download Quick start manual of EAW DX8 Music Mixer, Processor for Free or View it Online on All-Guides.com.

Brand: EAW

Category: Music Mixer , Processor

Type: Quick start manual for EAW DX8

Pages: 2 (0.76 Mb)

Download EAW DX8 Quick start manual

EAW DX8 Quick start manual - Page 1
1
EAW DX8 Quick start manual - Page 2
2
The DX8 is a DSP-based digital audio mixer
and signal processor designed for use in a variety
of in stal la tions such as churches, courtrooms,
con ven tion centers, and hotels. It provides eight
uni ver sal inputs and two balanced out puts
al low ing true 8x2 mixing for stereo or dual zone
ap pli ca tions.
Each of the eight input channels is terminated
op ti mized to accept either mic or line-level sig nals.
Microphone preampli ers use XDR™ tech nol o gy
to offer studio-class audio performance. Phantom
power of 48V DC is switchable individually on each
in put. Two auxiliary line-level inputs with trim are
provided, allowing analog signals to be mixed with
the A and B mas ter mixes. Master outputs de liv er
balanced line-level signals to detachable Phoenix-
type connectors as well as buffered un bal anced
signals to RCA con nec tors intended for recording.
The DX8 offers an intuitive front panel user in-
ter face, consisting of dual-func tion LED bar graph
meters for each input and output. Input meters
in di cate the presence of signal before signal pro-
cess ing (pre-fader), while out put meters in di cate
actual level at the output (post-fader). Levels are
set by means of UP/DOWN push but tons ded i cat ed
to each input and output. A MODE button is used to
select between Mix A and B, allowing adjustment
of levels to both mix outputs from the same set of
input controls. A third func tion of the MODE button
allows the user to LOCK the front panel controls
un til a security unlock code is entered.
IEC AC SOCKET
Connect the supplied AC linecord to the IEC AC
Socket.
PC SOFTWARE
INSTALLING THE SOFTWARE
A PC-based Windows-style graphical
interface software application is provided on a
CD-ROM to control and con gure the DX8 at the
point of installation.
TO INSTALL THE SOFTWARE ON A PC:
1.
Insert the DX8 CD-ROM into the CD drive.
2.
Make sure no other applications are open.
3.
Click Start, and then click Run.
4.
Type <drive>:\DX8-PC\Setup in the command line
(where <drive> is the letter assigned to the CD
drive, i.e., D drive)
5.
Setup will install the DX8-PC application onto your
PC. You can accept the default directory, or specify
a different location to install the application.
CONNECTING A PC
Use a standard DB9 (male/female) computer
cable to connect a PC to the DX8. COM 1 is
the default serial port selected in the software
application for the PC. Connect the COM port on
the PC to a COMM PORT on the DX8.
View the installed "Readme"  le for more
information about running the PC application and
using a different serial port on the PC.
Two independent RS232 con nec tors are
provided, one on the front panel and one on the
rear, for con nec tion to a computer, control system,
or compatible PDA. A DB25 connector on the rear
panel allows in ter face between the 10 Logic In puts
and 10 Logic Outputs to switches, LEDs and other
devices, en abling hard ware control and indication
from cus tom control panels. All logic inputs and
out puts are fully programmable in software. A
pro pri etary remote control bus allows connection
of the optional DX8 wired remotes over a variety
of three-conductor cable. Remotes are available in
Volume Control and 4-switch versions and may be
combined in any con guration.
The DX8 is supplied with PC software that
allows access to all of the sys tem’s settings and
con g u ra tions. The software offers Stereo and
Mono mix er views, as well as access to the two
1/3-oc tave equalizers, two 5-band parametric
equalizers and two compressors dedicated to
the two master out puts. In addition, it allows
con g u ra tion and recall of up to 16 Presets, 8
in put Priority Levels, 8 Mute Groups and 8 Control
Groups. Force ON and OFF functions are pro vid ed,
with a selection of Relative or Absolute changes,
which can be used with the Priority settings to
create so phis ti cat ed audio man age ment systems.
The DX8 is UL and CE approved and
designed for continuous use in pro fes sion al  xed
in stal la tion systems. An internal auto-ranging
power sup ply al lows connection to mains voltages
from 90-240V AC at 50/60 Hz with out requiring
jump er or switch setting changes. A 24V DC
input is provided for applications where backup
battery power is required. Switchover to back up
power is automatic and silent.
POWER
DX8 DIGITAL MIXER
SAFETY FIRST!
Before connecting and using the equipment,
please read this Quick-Start Guide carefully
and keep it for future reference.
WARNING!
This equipment has been
designed to be installed by quali ed
professionals only! There are many factors to
be considered when installing professional
sound reinforcement systems. Some of these
factors include mechanical and electrical
considerations, as well as acoustic coverage
and performance. LOUD Technologies strongly
recommends that this equipment be installed
only by a professional sound installer or
contractor.
1.
Never install, connect, or disconnect the
unit with the power supply on.
2.
Before powering up the DX8, make sure
the AC voltage applied corresponds to the
markings on the rear panel.
3.
Make sure the safety ground on the
power cord is properly grounded.
4.
To prevent the risk of electric shock,
never open the unit. There are no user-
serviceable parts inside.
5.
To ensure normal cooling of the DX810,
make sure the unit is well ventilated. Avoid
exposure to direct sunlight or proximity to
any heat source, dust, or dampness.
CAUTION:
To avoid the risk of electric
shock, never allow this equipment to be
exposed to rain or dampness.
CAUTION: Internal lithium battery.
Danger of explosion if battery is
incorrectly replaced. Replace only with the
same or equivalent type.
EAW Commercial | Bldg 11 | One Main Street | Whitinsville, MA 01588 USA | www.eawcommercial.com
TEL: toll free in US & Canada 888.337.7404 | TEL outside US 425.892.6503 | FAX: 425.485.1152
UK 44.1268.570.808 | FAX 44.1268.570.809
Part No. SW0093 Rev. A 01/04 © 2004 LOUD Technologies Inc. All Rights Reserved.
DX
8
8x2 Digital Mixer and Signal Processor
Quick-Start Guide
(continued on last page)
(continued from page 1)