EAW KF761 Specification Sheet

Download Specifications of EAW KF761 Portable Speakers, Speakers for Free or View it Online on All-Guides.com.

Brand: EAW

Category: Portable Speakers , Speakers

Type: Specifications for EAW KF761

Pages: 2 (0.11 Mb)

Download EAW KF761 Specifications

EAW KF761 Specifications - Page 1
1
EAW KF761 Specifications - Page 2
2
SPECIFICATIONS KF761
DESCRIPTION
APPLICATION
PERFORMANCE
One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 FAX 508 234 8251 info@eaw.com www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. KF761/0002963/2 pp April 2002 Printed in USA
The KF761 is part of the KF760 Line Array Series. The KF760
Series uses advanced divergence shading where all loud-
speakers are powered at equal level. A full KF760/KF761 array
can provide uniform sound coverage from directly beneath
itself out to hundreds of feet without complex signal pro-
cessing. Vertical coverage for the array is set by varying the
splay of the rear of the enclosures, leaving the fronts tight-
packed. This configuration produces a continuous, coherent
wavefront from the array, projecting extended range, high res-
olution sound over its full coverage area.
Fully professional construction features include Baltic birch
plywood enclosures, heavy-duty steel grilles, Neutrik NL8
connectors, heavy duty bar handles, rear hand-holds, and
accessory caster pallets. Six Year Warranty.
This high output touring system is scalable from theaters
under 1,000 seats to stadiums. The KF761 has two applica-
tions. KF761s are designed to supplement KF760s in an array
to provide near-field coverage for distances less than 70 feet.
The KF761 can also be used as part of a KF761-only array for
applications with coverage distances up to about 100 feet.
The minimum KF761 array size is four enclosures for full per-
formance. When used with KF760s they can be used singly or
in multiples depending on the coverage needed. For extend-
ing the low frequency response, KF940 bent horn subwoofers
are an ideal complement to KF761s or a KF760 Series array.
Applications include:
Arenas Convention Centers Large Ballrooms
Stadiums Theaters Music Pavilions
Auditoriums Outdoor Events
Frequency Response (Hz)
±3 dB (1) Enclosure Array 80 Hz to 16 kHz
±3 dB (4) Enclosure Array 60 Hz to 16 kHz
Axial Sensitivity (dB SPL, 1 Watt @ 1m)
LF Single Enclosure 96
MF Single Enclosure 107
HF Single Enclosure 112
Impedance (Ohms)
LF 2x 8
MF 8 (2@16 Ohm each)
HF 8
Power Handling (Watts Continuous)
LF 2000
MF 500
HF 150
Recommended High-Pass Frequency
24dB/Octave 40 Hz
Calculated Maximum Output (dB SPL @ 1m)
Single Enclosure
LF Peak 135
MF Peak 1407
HF Peak 140
LF Long Term 129
MF Long Term 134
HF Long Term 134
Nominal Coverage Angle, -6 dB points (degrees)
Horizontal 100
Maximum Vertical Splay 12
Product Group S
System Configuration 3-way, full range
Powering Tri-amplified
LF Subsystem 2x 12-in woofers, horn-loaded
MF Subsystem 2x 8-in cone, slot-loaded
HF Subsystem 2-in exit/3-in voice coil com
pression driver, horn-loaded
Enclosure (shape) Horizontal trapezoid
Enclosure Materials Exterior grade Baltic birch
plywood
Finish Wear-resistant black textured
paint
Connectors 2x Neutrik NL8
Suspension Hardware Proprietary EAW rigging system
Grille Powder coated perforated steel
Dimensions inches millimeters
Front Height 14.5 368
Rear Height 8.3 210
Width 45.0 1143
Depth 30.8 784
Trapezoid Angle 6 degrees top and bottom
Weights pounds kilograms
Net Weight 206 93.4
Shipping Weight 214 97.1
PHYSICAL