Home | About | Contact

EAW MQV2364e Specifications

Download Specifications of EAW MQV2364e Portable Speakers for Free or View it Online on All-Guides.com.

Brand: EAW

Category: Portable Speakers

Type: Specifications for EAW MQV2364e

Pages: 2 (0.22 Mb)

Download EAW MQV2364e Specifications

EAW MQV2364e Specifications - Page 1
1
EAW MQV2364e Specifications - Page 2
2
Page 1
background image

SPECIFICATIONS MQV2364e

FEATURES

PHYSICAL

One Main Street, Whitinsville, MA 01588

508 234 6158

Toll Free 800 992 5013

FAX 508 234 8251

[email protected] www.eaw.com

EAW products are continually improved. All specifications are therefore subject to change without notice.

MQV2364e/0002692/002/2 pp   October 2003

Printed in USA

FEATURES

DESCRIPTION

PERFORMANCE

APPLICATION

• Full-range, 3-way system 
• 2x 15-in LF; 2x 10-in horn-loaded MF; 2-in exit

Neodymium HF  

• 60° x 40° beamwidth
• Horizontally configured to create vertical arrays

A 3-way, full-range system in a vented trapezoidal enclosure.
Includes dual, slot-loaded 15-in woofers, dual, horn-loaded
10-in MF cones with Radial Phase Plug™, and a 2-in exit/3-in
diaphragm Neodymium compression driver. The MF and HF
horns provide a nominal 60° x 40° beamwidth. An internal
passive crossover with jumpers on the input panel allows user
selection of either bi-amplified or passive operation. In either
case digital signal processing is required to achieve specified
performance. The enclosure features a comprehensive system
of 3/8”-16 threaded suspension points.

The MQV2364e combines the MQ Series LF/MF/HF components
into a full-range, single-enclosure loudspeaker. It is horizon-
tally configured for arraying in vertical columns. This arrange-
ment is typically used in sports arenas and other venues where
the array must address wide, vertical audience angles. Dual LF
and MF components produce greater output than MQV1300
series products.  The MF/HF horns in the MQV2364e feature a
rigid but well-damped construction using wood veneer backed
by structural foam. A no-compromise design means the mid
and high frequency horns are truly large enough to provide
optimal pattern control throughout each passband.

Application Usage: Install

Houses of Worship          Auditoriums    Theatres
Performing Arts Centers    Arenas          Stadiums

Frequency Response

±3 dB 72 Hz to 15 kHz

-10 dB 50 Hz

Axial Sensitivity (dB SPL, 1 Watt @ 1m)

LF 97

MF/HF 108

MF 110

HF 108

Impedance (Ohms)

LF 4

MF/HF 4

MF 4

HF 8

Power Handling, AES Standard (Watts)

LF 1200

MF/HF 800

MF 800

HF 150

Calculated Maximum Output (dB SPL @ 1m)

LF Peak/Long Term 134/128

MF/HF Peak/Long Term 140/134

MF Peak/Long Term 142/136

HF Peak/Long Term 136/130

Nominal Coverage Angle, -6 dB Points (degrees)

Horizontal 60

Vertical 40

Recommended High-Pass Frequency 

24 dB/Octave 50 Hz

LF Subsystem 2x 15-in, vented

MF Subsystem 2x 10-in horn loaded cone, 

Radial Phase Plug™

HF Subsystem 1x 2-in exit/3-in voice coil com

pression driver on constant 
directivity horn

Configuration Three-way, full range

Powering Bi- or Tri-amplified

Enclosure Materials Exterior grade Baltic birch plywood

Finish Wear-resistant textured black paint

Connectors Terminal barrier strip 

Suspension Hardware 16x 3/8”-16 threaded mounting 

points (4 each on top, bottom 
and sides)

Grille Powder coated perforated steel

Dimensions

inches

millimeters

Height (front) 36.71

932

Height (rear) 25.36

644

Width 56.25

1429

Depth 25.59

650

Trapezoid Angle 12.5 Degrees per Side

Weights

pounds

kilograms

Net Weight 300

136.4

Shipping Weight 330

150.0