EAW CR58 Technical Specifications

Download Technical specifications of EAW CR58 Speakers for Free or View it Online on All-Guides.com.

Brand: EAW

Category: Speakers

Type: Technical specifications for EAW CR58

Pages: 2 (0.1 Mb)

Download EAW CR58 Technical specifications

EAW CR58 Technical specifications - Page 1
1
EAW CR58 Technical specifications - Page 2
2
CINEMA SERIES
One Main Street, Whitinsville, MA 01588 • (508) 234-6158 • FAX (508) 234-8251 • Email [email protected] • Web http://www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. • CR58 PUB#888133 Rev(A)/6/1/99 • Printed In USA
Technical Specifications CR58
APPLICATION
• For medium to very large cinemas
• Passive 2-way surround channel loudspeaker
• High ouput, full range response
PRODUCT INFORMATION
The CR58 two-way, passive, full range cinema surround loudspeaker
system is engineered to reproduce today’s stereo full bandwidth
digital surround tracks from wall mounted positions high above the
audience. It features a 15-in woofer and a 1-in exit compression
driver loaded with a wide dispersion constant directivity horn.
The CR58 is specifically engineered to cover a larger seating area
with higher quality, higher output sound than traditional cinema
surrounds. With 500 Watts AES standard power handling and a 90°
x 70° coverage pattern, it can be mounted higher and cover more
seats than traditional surrounds. Higher placement lets the systems
cover a larger area "across" the room creating a larger area of stereo
surround coverage than traditional surround placement. The system
produces 8 - 15 dB more output than traditional surrounds.
The front baffle is angled down 20° to accomodate overhead
mounting. The optimally vented enclosure increases LF response
while limiting driver excursion. This method produces less distortion
and minimizes driver strain while extending LF response to the
lowest octaves.
Six threaded mounting points on top of the enclosure allow the
system to be "dead hung" at a variety of vertical and horizontal
angles. Two mounting points (at the center of gravity on each side)
accept an adjustable wall mount bracket. Two additional mounting
points (one at the upper rear corner of each side) provide additional
mounting flexibility. A single mounting point on the bottom accepts
an L-bracket.
The passive crossover/filter network included in the CR58 is so
complex that it goes beyond merely dividing the signal and actually
performs critical equalization functions. This means it will provide
more detailed, more natural reproduction of any sonic event
occurring in the 360° aural arena.
The input connector – a 2-terminal barrier strip that accommodates
bare wire, tinned leads or spade lugs - is located on top of the
enclosure . The enclosure features a textured black finish to
eliminate visual intrusion of visible surrounds. For safety, the cloth
grill is attached with multiple threaded fasteners.
CR57e
510334 (0)
MKA 6/25/97
BOTTOM
BACK
FRONT
TOP
OVER GRILL FRAME
TYPICAL EACH SIDE
SIDE
POINT, 12X
4. INPUT HAS A SINGLE SET OF SCREW TERMINALS.
3. WEIGHT APPROX. 55#, SHIPPING WEIGHT 64#.
5. REMOVEABLE GRILL SHOWN IN SIDE AND 3D VIEWS ONLY.
6. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE IN INCHES
2. SYMBOL INDICATES CENTER OF BALANCE.
1. SYMBOL INDICATES 3/8-16 THREADED HOLE.
NOTES:
CR58