Eaw JF50S Specifications

Download Specifications of EAW JF50S Portable Speakers, Speakers for Free or View it Online on All-Guides.com.

Brand: EAW

Category: Portable Speakers , Speakers

Type: Specifications for EAW JF50S

Pages: 2 (0.44 Mb)

Download EAW JF50S Specifications

EAW JF50S Specifications - Page 1
1
EAW JF50S Specifications - Page 2
2
Acoustic Performance Partnership Eastern Acoustic Works JF50S
One Main Street, Whitinsville MA, 01588 USA • Phone 508/234-6158 • Toll Free 800/992-5013 • Fax 508/234-8251 • Web http://www.eaw.com • email info@eaw.com
A
C
O
U
S
T
I
C
A
L
P
E
R
F
O
R
M
A
N
C
E
P
A
R
T
N
E
R
S
H
I
P
SPECIFICATIONS JF50S
DIMENSIONAL DRAWINGS
DIMENSIONAL DRAWING
SERVICE ITEMS
LF: Complete Cone Driver
EAW Part No. 804056
HF: Complete Compression Driver/Tweeter
EAW Part No. 805010
Filter/Crossover Network: Complete Assembly
EAW Part No. 225199
6.39
REF T.S.C.
4.22
4.25
2.76
1.11
2.43
FRONT
13°
9.72
MOUNTING POINT, 3/8"-16 THREADED HOLE.
1/4-20 THREADED MOUNTING POINT, FOR OMNIMOUNT SERIES 75.
BACK
2.12
TOP
4.25
4.00
8.94
17.93
7.00
10.80
2.00
1.17
RIGHT SIDE
JF50S Left
510297
EXP 4/26/96 SHB
A & E SPECIFICATIONS
The two-way full range loudspeaker systems shall incorpo-
rate 2x 5.25-in LF transducers and a 1-in soft dome tweeter
HF transducer.
All drivers shall be magnetically shielded allowing the sys-
tem to be used in immediate proximity to video monitors.
The LF drivers shall be mounted in a vented enclosure tuned
for optimum low frequency response. An internal passive fil-
ter network shall provide fourth order acoustical crossover
and system equalization.
System frequency response shall vary no more than ±3 dB
from 98 Hz to 17 kHz at 4 Ohms or 111 Hz to 17 kHz at 16
Ohms measured on axis. The loudspeaker shall produce a
Sound Pressure Level (SPL) of 91 dB SPL on axis at 1 meter
with a power input of 1 Watt, and shall be capable of pro-
ducing a peak output of 119.4 SPL on axis at 1 meter. The
loudspeaker shall handle 175 Watts of amplifier power (AES
Standard). The system shall include an impendance switch
allowing the user to choose between 4 and 16 Ohm opera-
tion (nominal impedance). The system shall have nominal
coverage angles of 120° (h) x 80° (v).
The loudspeaker enclosure shall be asymmetrically tapezoidal
in shape. It shall be constructed of 1/2-in thickness void-
free cross-grain-laminated Baltic birch plywood and shall
employ extensive internal bracing. It shall be finished in
black catalyzed polyurethane. Input connectors shall be dual
Neutrik NL4 Speakon. 2x 3/8"-16 threaded mounting/sus-
pension points (1 each top and bottom) plus 4x 1/4”-20
threaded mounting/suspension points to accept Omnimount
Series 75 shall be provided. The front of the loudspeaker
shall be covered with a vinyl coated perforated steel grille
backed with open cell foam to protect against dust.
The two-way full range loudspeaker shall be the EAW model
JF50S. (Specify left or right.)