Vaillant VRT360f Quick User Manual
Download Quick user manual of Vaillant VRT360f Thermostat for Free or View it Online on All-Guides.com.
Brand: Vaillant
Category: Thermostat
Type: Quick user manual for Vaillant VRT360f
Pages: 2 (0.06 Mb)
1
2
Vaillant VRT360f quick user guide for end users
Operating modes
Timed - heating will operate to the programmed ON and OFF periods.
Constant - heating will operate continuously irrespective of programmed times.
Setback - heating is operating at the “ECO” temperature
OFF - heating is permanently off
Note: The above symbols could be shown together e.g indicates heating is timed and
ON.
Setting the operating mode
From the basic screen press the “Click and Turn” knob one click, one of the operating mode
symbols will flash. Whilst the symbol is flashing rotate the knob to select the desired operating
mode. The operating mode is set and the symbol will stop flashing after 5 seconds.
Setting the target room temperature
From the basic screen rotate the “Click and Turn” knob 1 one click clockwise. The current target
temperature is shown flashing. To adjust the target temperature rotate the knob clockwise to
the new desired target temperature, the display will return to the basic screen in approx 5
seconds.
Override function
From the basic display push the “F” button once. The
symbol is displayed together with a
flashing temperature, rotate the knob to set the desired temperature for the override period.
This mode will be active until the next time window. To turn off the override function simply
press the “F” button, the display will revert back to the basic display after approximately 10
seconds.
Note: The time and date should have been set-up by your installer, if necessary refer to
installation manual for details of how to set time & date
Basic Display
Main function “Click
and Turn knob”
“Program”
button
Current room
temp
Operating mode
“Function”
button