Valcom VE9894-1-Finish Specifications

Download Specifications of Valcom VE9894-1-Finish Emergency Phone for Free or View it Online on All-Guides.com. This version of Valcom VE9894-1-Finish Manual compatible with such list of devices, as: VE9894-1-Finish, VE9894-2-Finish, VE9894-3-Finish, VE9894-4-Finish

Valcom VE9894-1-Finish Specifications - Page 1
1
Valcom VE9894-1-Finish Specifications - Page 2
2
1 947786
Issue 1
IP HANDSFREE CALL STATION
VE9894-1-Finish (Single Button)
VE9894-2-Finish (Two Button)
VE9894-3-Finish (Three Button)
VE9894-4-Finish (Four Button)
INTRODUCTION
The VE9894-x-Finish Vandal Resistant IP
Handsfree Emergency Call Station provides
communication to a multiple answer locations, i.e.
Emergency assistance, general assistance,
information, directions and public accessible
recorded information.
Pressing a “Call” button on the IP emergency
phone initiates a call to any SIP telephone, SIP
address, PC softphone, Valcom intercom station or
to a Valcom IP gateway. At the time of activation a
call status LED begins to flash. When the call is
answered the call status LED remains “ON”. When
the called party terminates the call, the LED is
extinguished, the connection is released
automatically. An “Emergency Call” has priority
over any other call in progress.
SPECIFICATIONS
Features:
Power over Ethernet (PoE) 802.3af compatible
Compatible with most modern IP Telephone
systems
Call buttons calls a SIP address or any Valcom
Gateway
Automatic Talkback VOX operation (no Push To
Talk button needed)
Easy, RJ-45 plug in, Cat 5 or 6, LAN /WAN
10/100
SIP or Multicast addressable
All Call thousands of units with Valcom
Gateway
Red LED status indicator
Brushed stainless steel faceplate
Auxiliary relay (strobe or camera activation)
Compatible with secure networks
Supervision with alert functions
Web-based firmware upgradeable
Web Interface For Control And Setup DHCP
High Survivability –No Server Needed
Vandal Resistant and Tamper-Proof Hardware
Speaker
3.5" dia.
Mounting
Surface Mount
Speaker Output
100dB @ 4' on-axis
Switches
Single Pole Momentary Contact
Power
Extend: 24 VDC @ 325 ma
POE: 802.3af, class 3
Auxiliary Relay
Form C Contact
Contact Rating: 24VDC 2Amp
Networking
10/100 Mbps Ethernet port
Manual or Dynamic Host Configuration Protocol
(DHCP) IP address setup.
Time and date synchronization using SNTP
Protocols
IETF SIP (RFC3261)
IETF IGMP version 3 (RFC3376)
IETF RTP (RFC1889)
IETF RFC2833
Digest Authentication
* Other protocols available upon request