Edge USB Watch Quick Installation Manual

Download Quick installation manual of Edge USB Watch Software, Storage for Free or View it Online on All-Guides.com.

Brand: Edge

Category: Software , Storage

Type: Quick installation manual for Edge USB Watch

Pages: 1 (0.03 Mb)

Download Edge USB Watch Quick installation manual

Edge USB Watch Quick installation manual - Page 1
1
This Product is backed by a One Year Limited Warranty.
For complete warranty information visit www.edgetechcorp.com/register
For a detailed instruction manual go to www.edgetechcorp.com/support/manuals
NEED
HELP?
TECH SUPPORT
www.edgetechcorp.com/support
3301 Ver3(09-04)
DiskGO!
TM
USB Watch
Drive-Casual Style
Quick Installation Guide
327 East 14th Street / Ada OK 74820 (800) 332-6581 / (580) 332-6581 / www.edgetechcorp.com
EDGE
TM
and DiskGO!
TM
are trademarks of EDGE Tech Corp. Trademarked words or logos used herein are property of their respective owners.
IMPORTANT
PLEASE CONTACT A QUALIFIED TECHNICIAN FOR ASSISTANCE IN INSTALLING OR USING THIS PRODUCT IF YOU ARE NOT
FAMILIAR WITH DOING SO. ANY INSTRUCTIONS INCLUDED WITH THE PRODUCT ARE FOR CONVENIENCE ONLY AND ARE NOT
INTENDED TO BE ALL-INCLUSIVE.
Note: This manual supercedes the instructions on the accompanying CD.
Thank you for purchasing the DiskGO! USB Watch Drive. Built with only high-quality components, this product is
made to deliver you the best in file transfer convenience and portability. Enjoy the flexibitlity of having your data
easily accessible from your everyday watch!
SETTING THE TIME
Pull out the crown. Turn the crown in either direction to set hour and minute. Push the crown to the normal position
to start.
BASIC FUNCTIONS FOR USE ON A PC
When you plug the device into the USB port of your PC, you will see a “Removable Disk” icon in the file manager
window. (If you are using Windows 98, you must install the driver before you install the application software.)
FOR USE ON A MAC
If using the DiskGO! Watch on a Macintosh, using OS 9.0 or higher, when you plug the watch into the USB port, you
will see the disk icon on the Desktop.
For MAC OS 8.6, you must download the necessary USB mass storage driver from Apple’s website before using the
DiskGO! USB Watch Drive.
If using MAC OS 10.2 or higher and you get a persistent Initialization Error, you may need to download the MAC OS
10.2x or 10.3x patch. This patch is available for download from our website at http://www.edgetechcorp.com/support/
diskgowatch.asp.
In Linux OS, you can use the following instruction to “mount” the device:
1) Plug the device into the USB port of your computer.
2) Execute cd /etc/sysconfig ( cat /etc/sysconfig/hwconf | more )
3) Check the device information in hwconf; write down the mount point.
4) Make a directory in /mnt ( ex: mkdir /mnt/usbHD ).
5) Execute mount /dev/sda1 /mnt/usbHD (if mount point was .dev/sda)
Read/Write Capability
You can read, write, copy, and delete files and data as you do files and data on a hard drive or floppy disk. The USB
Watch Drive allows for easy drag and drop of your files.
Unplugging the Device
IMPORTANT! DANGER! HOLD THE CABLE FIRMLY WHEN UNPLUGGING IT.
TUGGING ON THE WATCH TO UNPLUG THE CABLE MAY PERMANENTLY DAMAGE THE CABLE.
SUCH DAMAGE IS NOT COVERED BY WARRANTY.
When using Windows ME, 2000, or XP, you must stop the device using the “safe removal” icon in the system tray.
1) Before you remove the DiskGO! Watch, please make sure the LED is not flashing. If the LED is flashing, there is
still communication occuring between your computer and the DiskGO! Watch. Do not remove the DiskGO! Watch; it
may cause damage to the data, and possibly the DiskGO! Watch itself.
2) Double-click the “Safe removal” icon to bring up the “Unplug or Eject Hardware” window.
3) Select the device you wish to remove (USB Mass Storage Device). Then click “Stop”.
4) Wait until you see the message indicating it is safe to unplug the device from the USB port. It is now safe to
remove your DiskGO! watch from your computer.
If you are using a Macintosh, you can drag the removable disk icon into the trash bin. This will perfom the “Eject”
function which will allow you to safely remove the DiskGO!.
If you are using Linux, please use the “umount” command to remove the device.