Varimixer W80A Brochure

Download Specifications of Varimixer W80A Mixer for Free or View it Online on All-Guides.com.

Brand: Varimixer

Category: Mixer

Type: Specifications for Varimixer W80A

Pages: 2 (0.17 Mb)

Download Varimixer W80A Specifications

Varimixer W80A Specifications - Page 1
1
Varimixer W80A Specifications - Page 2
2
Specifications
Standard Features
W80A
Models
W80A Food Mixer
W80A Food Mixer
Project
Item
Quantity
CSI Section 11400
Approval
Date
Options &
Accessories
Powerful 4 hp motor
• Variable speeds from 50 to 250 RPM
By manually operating a single lever, the
bowl raises and locks in position.
Overload protection and no voltage
release
No bowl adaptors required for the down-
size bowls
•#12 attachment hub with 198 rpm speed
• Locking pin on tools instead of shaft.
Neoprene feet to minimize walking and
rusting
Permanently lubricated planetary head
and attachment hub case
• 15-minute timer with HOLD feature
• Stainless steel 80-qt. bowl, wire whip and
dough hook
• Alloy flat beater
40-qt. bowl and accessories
Bowl scraper in 80-qt. and 40-
qt. sizes
Stainless steel wing whip
Pastry knife
Bowl Truck with handle
Vegetable slicer and shredder
plates
Power Bowl Lift
Meat grinder
Mark IV programmable
controls
Ergo (tall column)
5489 Campus Drive
Shreveport, LA 71129 USA
Tel: 318-219-7051
Tel: 1-800-222-1138
Fax: 318-635-3131
E-mail: mix@varimixer.com
www.varimixer.com
Bulletin No. W80A 09/07
Mixing system
The VARIMIXER W80A is a planetary mixer with
a variable speed drive system. The mixer frame
consists of a column with welded-on feet, and
a top traverse closed by a stainless steel cover.
The bowl is mounted in bowl arms which are
manually raised and locked simultaneously - or
lowered and opened, respectively. The column
contains the motor and the bowl arm mecha-
nism. The top traverse contains the transmis-
sion system consisting of the moveable pulleys,
the intermediate belt drive and the planetary
head. Start and stop push buttons are mounted
on the frontplate along with a 15-minute
electrical timer with a HOLD feature. Mixing
tools are mounted in a bayonet shaft in the
planetary head.
Construction
Mixer frame of heavy-gauge, welded, rolled
steel plate. Durable powder coated finish
used on those surfaces not constructed of
stainless steel. Top cover, splash apron and
planetary head cap in heavy-gauge stainless
steel. Molded PVC feet pads. Bowls in stainless
steel. Mixing tools in cast aluminum or stainless
steel. Bayonet shaft in stainless steel. Variable
speed V-belt transmission based on precision
machined cast iron pulleys. Springloaded
moveable pulleys in the variable speed drive
for automatically adjusting of the tension of
the special V-belt. Planetary mixer head of
unique design. The planetary head revolves in
heavy-duty ball and needle bearings around
the main shaft. Precision milled beveled gear
on the main shaft engages the bayonet shaft
and the fixed internal gear ring through a
double set of milled gears obtaining extra high
torque capabilities of the mixing tools.
Precision milled cast iron bowl arms lower and
raise the bowl and clamp it in a precise position
relative to the mixing tool allowing for small
tolerances between tool extremities and the
bowl.
Attachment drive directly coupled to the motor
securing maximum power output to the meat
grinder or vegetable cutter. The 198 rpm high
speed and the powerful motor give the meat
grinder an unusually high capacity in relation
to the size of the mixer.