Eicon Networks C90 Specification

Download Specification of Eicon Networks C90 Adapter for Free or View it Online on All-Guides.com. This version of Eicon Networks C90 Manual compatible with such list of devices, as: C90, C91, S51, S90, S92

Eicon Networks C90 Specification - Page 1
1
Eicon Networks C90 Specification - Page 2
2
www.eicon.com
Eiconcard Connections for Linux
Technical Specifications
!
!!
! Software Features:
Frame Relay Support
Supports both LMI 1.0 (Local Management
Interface) and T1.617 Annex D Link
Management
Congestion control (FECN, BECN)
Discard eligibility support
RFC 1490: Multiprotocol encapsulation and
segmentation
PPP Support
RFC 1334: PAP (PPP Authentication
Protocol) and CHAP (Challenge
Authentication Protocol)
RFC 1618: PPP over ISDN
RFC 1661: PPP
RFC 1717: Multilink PPP
RFC 1332: Internetwork Protocol Control
(IPCP) (partial)
RFC 1552: Internetwork Packet Exchange
Control Protocol (IPXCP) (partial)
X.25 Support
STREAMS interface to X.25
X.3/X.28/X.29 Host and Terminal PAD drivers
CCITT/ITU X.25, X.32 and X.121 (1984)
Supports X.32 for Transpac (France) and
X.32E for Ericsson ERIPAX
Supports up to six Eiconcards, with up to 254
PVCs/SVCs per card
Up to 254 virtual circuits per card
PVC and SVC support
RFC 1356: Multiprotocol interconnect on X.25
Management of outgoing and incoming calls
and all X.25 facilities
Operates in terminal mode (DTE) and host
mode (DCE)
ICTR-2 certification
Certified on over fifty Public Data Networks
worldwide
ISDN Support
North America: NI-1 and AT&T Custom
(5ESS)
Europe: Euro-ISDN
Australia: TPH1962
Japan: INS-NET 64
Circuit and packet switching modes
X.25 on both B and D-channels
General
Internet access for corporate users over
Frame Relay, PPP, ISDN and X.25 and for
mobile users over X.25
Easy-to-use install and configuration utilities
Plug and Play automatic hardware detection
Intel x86, Pentium support
!
!!
! Other Software Modules:
X.25 Development Tools for Linux
A software development kit (SDK) for
developing custom applications that need to
exchange data over an X.25 network via an
Eiconcard
Complies with CCITT X.25, X.32 and X.121
Supports X.32 for Transpac (France) and
X.32E for Ericsson ERIPAX
Supports Permanent Virtual Circuits (PVCs)
and Switched Virtual Circuits (SVCs)
Supports up to 254 virtual circuits
Supports optional user facilities such as
Network User Identifier (NUI), Reverse
charging, Call User Data, Closed User Groups
(CUGs), throughput class negotiation and
window size negotiation
!
!!
! Hardware Requirements:
WAN Adapter Requirements
An Eiconcard
ISA or EISA bus
Operating System Requirements
Red Hat Linux 6.1or 6.2
GCC Compiler
Processor Requirements
PC with single processor