Electro-Voice TG5 Technical Specifications

Download Technical specifications of Electro-Voice TG5 Amplifier for Free or View it Online on All-Guides.com.

Brand: Electro-Voice

Category: Amplifier

Type: Technical specifications for Electro-Voice TG5

Pages: 2 (0.15 Mb)

Download Electro-Voice TG5 Technical specifications

Electro-Voice TG5 Technical specifications - Page 1
1
Electro-Voice TG5 Technical specifications - Page 2
2
General Description:
Key Features:
Up to 2 x 1900W into 2 Ohms
Grounded Bridge Class-H Design
Microprocessor Controlled
Front LCD-Panel for Operation
Mode Set-Up and Monitoring
Slot for Optional IRIS-Net
TM
Compatible
Control Module
Complete Protection Package
Only 14.2 kg (31.4 lbs)
Designed and Manufactured in Germany
TG5
Ultra-High Performance
Two-Channel
Power Amplifier
Technical Specifications:
The TG-5 Tour Grade amplifier has a microprocessor
controlled operation management system that provides
useful features such as compound thermal management
(preventing the unit from switching off in excessive thermal
environment), automatic mains voltage detection and a
circuit breaker control that allows the TG-5 to operate on a
30A (120V) or 16A (230V) circuit breaker with normal music
signals.
The TG-5 uses a grounded bridge 3-step class-H topology
to ensure the highest acoustic performance and reliability.
The TG Series also offers the power and transient response
to drive subwoofers and along with the low distortion for
critical HF signals. The high capacity switch-mode power
supply provides the headroom needed to ensure high
dynamic outputs and reliable operation on extreme low
loads.
Optional IRIS-Net™ (Intelligent Remote & Integrated
Supervision-Network™ ) Modules available for the TG-5
amplifiers enable state-of-the-art DSP, remote control,
networking and unique system supervision – down to an
individual loudspeaker component. IRIS-Net™ software is
an expandable, open architecture application that operates
under Windows™ and supports Ethernet, CobraNet™, CAN-
Bus, USB, and RS-232 interfaces. Several modules are
available including the: RCM-26 (DSP, AES/EBU input, GPIO,
CANBus), RCM-28 (DSP, GPIO, COBRA-Net™) and the
RCM-20 (no DSP, CAN-Bus) The modules enable different
levels of control and monitoring of the amplifier. The
connection of the TG-5 to a PC running IRIS-Net software
can be achieved using a UCC-1 USB-CAN interface and/or
a N8000 digital matrix.
ecnadepmIdaoLmhO8mhO4mhO2
rewoPtuptuOdnabdiM.xaM
lennahClauD,zHk1,zHk1=DHT
W058W0541W0091
rewoPtuptuOdetaR.xaM
zHk02zH02,%1,0,DHT
W006W0021-
rewoPtuptuOdegdirB.xaM
zHk1,%1=DHT
---
ytivitisneStupnI
)smhO8@rewoPdetaR(
uBd7+/6+/0
)elbahctiwS(
rewoPtuptuOdetaRtaDHT%50,0<
)zHk7,zH06(ETPMS-DMI%50,0<
leveLtupnI.xaM)smrV57.9(uBd22+
)rewoPtuptuOdetaR,zHk1(klatssorCBd08-<
)zHk1.fer(esnopseRycneuqerF)Bd1±(zHk03-zH01
ecnadepmItupnIsmhOk02
)zHk1(rotcaFgnipmaD004>
etaRwelS/V0s
)niaGBd23,dethgiew-A(oitaRN/SBd901
dethgiew-A,esioNtuptuOuBd07-<
ygolopoTegatStuptuOdednuorGH-ssalC
egdirB
stnemeriuqeRrewoProzH06/05,V042-001
zH06/05,V001
noitpmusnoCrewoP
smhO4@tuptuO.xaM8/1
W0001
gnilooC,raeR-ot-tnorF
snaFegatS-5
stimiLerutarepmeTtneibmAC°04+-C°5+
)F°501-F°04(
)DxHxW(snoisnemiDmm215x1.88x384
"51.02x"64.3x"91
thgieW)sbl4.13(gk2.41