Electro-Voice T221M Quick Manual
Download Specifications of Electro-Voice T221M Speakers, Speaker System for Free or View it Online on All-Guides.com.
Brand: Electro-Voice
Category: Speakers , Speaker System
Type: Specifications for Electro-Voice T221M
Pages: 6 (0.28 Mb)
1
2
3
4
5
6
T221M
Biampable, Compact,
Two-Way Floor Monitor
Speaker System
• Constant-directivity 80° x 55° horn
with 2-inch titanium driver
• High-output, 400-watt, 12-inch woofer
• Biamped or full-range operation-
simple biamp instructions included
inside the enclosure
• Rock-solid enclosure made with
12-ply curved plywood shell
• PRO
TM
circuit provides HF driver
protection
• Professional Neutrik Speakon
®
connectors for biamp or full-range
operation
Description
The Electro-Voice T221M is a 400-watt, two-
way, high-efficiency floor monitor system. It
combines professional-quality components,
highlighted by the DH2T compression driver
and 400-watt, high-output 12-inch woofer.
The system may be biamplified or used full
range with the internal passive crossover.
Either way, the result is clear and articulate,
high-quality sound.
The enclosure is constructed of a void-free
3/4-in. 12-ply curved plywood shell which
is extremely rigid. The baffle and end pieces
are made from 13-ply birch plywood. This
high-strength enclosure is sprayed with a
resilient, textured black finish for a truly pro-
fessional appearance. The end-mounted,
heavy-duty, recessed handle makes trans-
portation easy and three rubber feet on the
opposite end help keep the finish looking
new.
The high-frequency section of the T221M
utilizes a compact 80° x 55° constant-direc-
tivity horn driven by a wide-bandwidth, two-
inch-titanium-diaphragm driver. The voice
coil is coupled to the diaphragm with EV’s
exclusive Resonant Drive
TM
technology. This
increases and smooths the high-frequency
response and reduces the amount of internal
equalization required for flat frequency re-
sponse.
EV’s self-resetting PRO
TM
circuit is built into
the crossover network to guard the compres-
sion driver from damage. If input power to
the driver exceeds the nominal rating, the
PRO
TM
circuit is activated, reducing the
power delivered to the driver by 6 dB. The
system will remain in this mode of opera-
tion until input power is reduced to a safe
level.
The optimally vented bass section of the
T221M is designed using Thiele-Small pa-
rameters for efficient performance to below
100 Hz. The high-output 12-inch woofer
delivers outstanding performance. It features
beryllium copper lead wires with a low-mass,
edge-wound voice coil and high-temperature
materials. The coil is driven by a massive,
15-lb magnetic structure.
Frequency Response
The combination of a 12-inch woofer, DH2T
wide-bandwidth high-frequency driver and an
equalized crossover results in the wide and
smooth overall response shown in Figure 2.
The T221M’s axial frequency response was
measured in Electro-Voice’s large anechoic
chamber at a distance of 10 feet with a swept
sine-wave input of 4 volts. Figure 2 has been
averaged and corrected for 1 watt/1 meter,
half-space operation.
Directivity
The polar response of the T221M speaker
system at selected one-third-octave band-
widths is shown in Figure 1. These polar
responses were measured in an anechoic
environment at 20 feet using one-third-oc-
tave pink-noise inputs. The frequencies
selected are fully representative of the polar
response of the system. Beamwidth of the
system utilizing the complete one-third-oc-
tave polar data is shown in Figure 1. R
θ
and
directivity index (D
i
) are plotted in Figure 4.
Biamping
The T221M may be easily converted for
biamp operation. To do this, first carefully
remove the crossover. Notice the instruc-
tions on the circuit board and the four-wire
“Molex” connector. The T221M comes from
the factory in passive (full-range) mode. To
convert the T221M to biamp operation, un-
plug the “Molex” connector from the header
marked “PASSIVE MODE (FULL
RANGE”) and plug it into the header labeled