• Home
• Brands
• Alarm Lock Manuals
• Alarm Lock PADDLE ARM 265
• Alarm Lock PUSH BAR 715 Installation & Operation Manual

Alarm Lock PUSH BAR 715 Installation & Operation Manual

Download Installation & operation manual of Alarm Lock PADDLE ARM 265 Security System for Free or View it Online on All-Guides.com.

1

2

3

4

5

6

7

8

1

345 Bayview Avenue

Amityville, New York 11701

CALL TOLL FREE: 800-ALA-LOCK

(800) 252-5625

ELECTRONIC EXIT DOOR ALARMS

PADDLE ARM MODEL 265/265L

PUSH BAR MODEL 715

INSTALLATION AND OPERATION INSTRUCTIONS

GENERAL DESCRIPTION

Models 265, 265L (long arm) and 715 are non-handed,

delayed egress, electronic exit door locking systems. Arming

is accomplished by actuating the deadbolt using a 1

1

/

8

” rim

cylinder (not included). When armed, depressing the paddle

(Model 265) or push bar (Model 715) will release the

deadbolt and sound an immediate alarm, however the

deadlatch will prevent the door from opening until the 15-

second exit delay has expired. Provisions are made for

instant alarmed exit in the event of actual emergencies, such

as smoke, fire, power failure, etc., using auxiliary detection

equipment.

A standard 9V alkaline battery is provided. This battery must

be installed at all times for proper operation of the unit. An

LED on the Control Box indicates that the unit is armed.

SPECIFICATIONS

Power: 12Vac, 20VA Transformer; 9Vdc Alkaline Battery

(Alarm Standby)

Current: 775mA max.; Alarm Circuit, Battery Only (Ac

Failure): Standby, 20µA typ.; Alarm, 75mA typ.

Standby: 1 year typ.

Battery Life: 200 alarm sequences typ. or constant alarm for

7 hours typ.

Latch Release Time: 13-15 seconds

Auto Alarm Shutdown: 2 minutes typ.

Sound Pressure Level: 95dB measured at 10 ft.

Operating Temperature: 20 to 135°F (-7 to 57°C)

Finish: US28 Aluminum or US312 Duronodic Powder Coat

Dimensions (hxwxd): Lock: Model 265, 8½”x18”x3¼”;

Model 715, 8½”x33”x3¼”; Control Box: Model 265 or

Model 715, 5”x3½”x2”

Shipping Weight: Model 265, 11½ lbs; Model 715, 13½ lbs.

FEATURES

• 15-second delayed egress

• Meets NFPA101 Life Safety Code

• Local smoke-detector input (easy key reset)

• Selectable alarm: continuous or two-minute shutdown

• Exterior key control (requires additional rim cylinder)

• Audible low-battery indication

• Visual armed indicator LED (on Control Box)

• Piercing electronic siren (95dB at 10 feet)

• Full 1” throw deadbolt with rotating steel inserts.

EQUIPMENT SUPPLIED

• The following items are supplied with the product:

• Lock Assembly, with 9V alkaline backup battery

• Single-Door Keeper Assembly

• Paddle-Arm Assembly (Model 265); or Push Bar

Assembly (Model 715)

• Control Box Assembly

• Model 271 Flexible Conduit, with covers (2)

• Power Transformer

• 5-Conductor Cable (10 feet)

• Self-Adhesive Warning Labels (Model 265, 1; Model

715, 2) required to comply with NFPA 101 Hardware

OPTIONAL EQUIPMENT

• Available on special order: Option 88 Version - Remote

Interface and Alarm Indicator Relay

• Rim Cylinder, Model CER or equivalent (required)

• Surface Wiring Kit, Model SWK715

• Smoke Detector, 2-Wire. (Recommended: System

Sensor 1400, 2400, 2400TH; or 1451, 2451, 2451TH

with B401B Base)

INSTALLATION

Preliminary Considerations

Important! To comply with National Fire Protection

Association Standard NFPA101, this lock must be connected

to an approved supervised automatic fire-detection system or

sprinkler system that will automatically unlatch the lock

instantly in the event of an emergency. See Connection to

Remote Life-Safety Equipment.

Models 265 and 715 are designed for use on doors equipped

with door checks to ensure that the door closes completely

and automatically. The Lock Assembly is mounted on a

single left- or right-handed reverse steel door. (These

instructions include information for mounting Model 715 onto

a narrow-stile glass door). Mounting onto a solid door

P5708A 11/93

Fig. 1 Typical Installation, left-handed reverse door, inside view. If

snaking wires within door, see Note above.