• Home
• Brands
• Vinotemp Manuals
• Vinotemp WM-2500SSD
• Vinotemp WM-2500SSD Installation, Operation & Care Manual

Vinotemp WM-2500SSD Installation, Operation & Care Manual

Download Installation, operation & care manual of Vinotemp WM-2500SSD Kitchen Appliances, Wine Cooler for Free or View it Online on All-Guides.com. This version of Vinotemp WM-2500SSD Manual compatible with such list of devices, as: WM-2500SSD, WM-4500SSD, WM-6500SSD, WM-8500SSD

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

- 14 -

Installer’s Instruction

Federal law requires that WINE-MATE split cooling systems be

installed by an EPA certified refrigeration technician.

1. General Instructions

WINE-MATE split system is shipped as components and is ready for use only

after a certified refrigeration technician has properly installed the system. Proper

installation is critical. Vinotemp can only warrant the quality of the components.

The installation and proper operation of the system must be warranted by the

installer. Installation of the system must be done in accordance with all state and

local building and electrical codes.

The condensing unit and evaporator unit are connected by a liquid line and an

insulated suction line that are supplied by the installer. These lines must be

properly sized for the distance between the two units. After the units and lines

are connected, the system must be checked for restriction, pressurization and

leak. Then the system must be evacuate and charged with refrigerant.

Refrigerant amount will vary depending on the length of line set.

Parts included:

Evaporator Unit (liquid line solenoid valve and expansion valve installed)

Condensing Unit (discharge and suction valves installed)

Liquid Filter

Liquid Indicator

Temperature Controller (4.5”LX4.5”WX3.75”D) + Air Probe

Parts not included:

Liquid line copper tubing

Suction line copper tubing