• Home
• Brands
• Visonic Manuals
• Visonic TOWER 10 AM -
• Visonic TOWER 10 AM Installation Instructions

Visonic TOWER 10 AM Installation Instructions

Download Installation instructions manual of Visonic TOWER 10 AM - Other, Storage for Free or View it Online on All-Guides.com.

1

2

3

4

5

6

7

8

D-300909 TOWER 10 AM, TOWER 12 AM Installation Instructions 1

TOWER 10 AM, TOWER 12 AM [GRADE 3]

English

Anti-Masking PIR and Dual technology (PIR/MW) Mirror Detectors -

Installation instructions

EN:

Yellow, red & green LEDs

SP:

LEDs amarillo, rojo y verde

PT:

LEDs amarelo, vermelho e verde

Figure 1 - TOWER 10 AM / TOWER 12 AM

Español

Detectores de espejo (PIR/MW) Doble Tecnología y Anti-Masking

Portuguese

Detectores de Espelho PIR e Dupla Tecnologia (PIR/MW) Anti-

Mascara. Instruções de Instalação

ENGLISH

1. INTRODUCTION

The TOWER 10 AM PIR and TOWER 12 AM Dual Technology are

professional vandal resistance Anti-Masking detectors designed for

large commercial and industrial applications providing wide coverage

with superior resistance to harsh environment, employing several

revolutionary patented technologies

. Both detectors comply with EN

50131-1 Grade 3.

Features:

 V-slot recessed small window technology (patent pending) for

extreme mechanical robustness and protection from false alarms

(patent pending).

 "Obsidian Black Mirrors"™ and "Elliptic / Parabolic Mirror"

technology providing over 15,000 LUX resistance to white light and

multiple-solid curtain pattern with 50% better sensitivity than

comparable mirror optics (several patents pending).

 Adaptive Active Infra-Red Anti-Masking technology providing the

most advanced reliable protection against intentional masking

attempts (patent pending).

 Optional interchangeable Long-Range Curtain mirror providing 35m

x 2.5m (115ft x 8.2ft) coverage for TOWER-10 and 25 x 2m (82 x

6.5ft) coverage for TOWER-12.

 Installer friendly features:

Built-in selectable E.O.L. resistors for alarm, trouble and tamper outputs.

Plug-in terminals attached to base for easy pre-wiring.

Unique sliding closing mechanism with captive screw.

Extended mounting height 1.5 - 4m (5 - 13 ft.).

Low supply voltage indication.

Remote controlled walk-test input.

Optional mounting brackets.

Selectable range adapted to the protected area size by use of a

Range Selector (TOWER 12 AM).

 Microprocessor controlled, digital TMR signal processing with dual-

slope digital temperature compensation.

 Front and Back tamper.

 True "Creep zone" down looking optics.

 Pet immunity (18Kg/40lb) using a special "pet mask".

 Built-in auto diagnostic for both PIR and microwave detectors.

2. SPECIFICATIONS

OPTICAL

Mirror Types (see Fig. 2)

Wide Angle

Long Range Curtain

coverage

TOWER 10 & 12 TOWER 10 TOWER 12

25mx30m / 90º 35m / 5º 25m / 5º

Far Field Of View (FOV)

Medium FOV

11 curtains

6 curtains

1 curtain

1 curtain

Event counter settings 1 or 2 LR

Mounting:

Method: Surface, corner or at 45º to wall.

Height: 1.5 - 4m (5-13 ft.) without bracket.

Vertical adjustment: Angled base surface provides three tilt

adjustments according to mounting height and coverage range.

ELECTRICAL

Sensors type:

PIR: dual element low noise pyroelectric sensor.

MW: X-Band Doppler module.

For UK - 10.687 GHz,

For EU / USA – 10.525 GHz..

For German/Czech 9.35 GHz

Supply voltage: 8 – 16 VDC.

Low voltage detection: If input voltage is below 7.5 VDC.

Supply current:

Standby @ 12 VDC: 12mA (TOWER 10 AM). 15 mA (TOWER 12).

Maximum: 14mA (TOWER 10 AM). 18 mA (TOWER 12).

Alarm period: 2 to 3 sec.

Masking detection delay: 30 sec.

Remote LED enable input (TST): High impedance input. Affects

LEDs operation only if internal LEDs selector is set to OFF.

Outputs:

Alarm output: Solid State Relay. NC, 100 mA / 30 V, 35 ohm

maximum internal resistance. "Open" for 2 – 3 sec. in case of

alarm, masking event or complete power failure.

Trouble output: Solid State Relay. NC, 100 mA / 30 VDC, 35 ohm

maximum internal resistance. "Open" in case of auto-diagnostic

failure, Anti-Mask event, low voltage or complete power failure.

Tamper output: NC switch, 50mA / 30 VDC. "Open" by opening

detector’s cover or removing it from mounting surface.

Built-in End Of Line resistors circuit: Selectable serial resistors for

each of the three outputs.

Resistors values: (tamper & alarm) ∞, 1kΩ, 2.2kΩ, 4.7kΩ, 10kΩ,

(trouble) ∞, 1kΩ, 2.2kΩ, 3Ω, 39kΩ (see figure 5).

LED indications:

Indication

Event / status

TOWER 10 AM TOWER 12

Red flashing Low voltage

Yellow + Red

flashing alternately

Yellow + Red + Green

flashing alternately

Warm-up

(60sec.)

Yellow + Red flashing simultaneously Self-test failure

Yellow ON AM detection

Red ON ALARM

--- Green flashing PIR detection

--- Green ON MW detection

Warm-up time: 60 sec.

ENVIRONMENTAL

Operating Temperature: –20°C to 55°C (-4°F to 131°F).

Storage Temperature: –20°C to 60°C (–4°F to 140°F)

RFI Protection: Greater than 20 V/m (up to 2 GHz).

Housing: IP41 and IK04 .

Dimensions: 160x77x47mm (6-5/16 x 3 x 1-13/16 in.)

Optional ACCESSORIES:

BR-1: Surface mounted swivel bracket, adjustable 30° down and 45°

left/45° right.

BR-2: BR-1 with a corner adapter

BR-3: BR-1 with a ceiling adapter

CURTAIN-10/12: Interchangeable long range 35m/5° curtain mirror

PET-10/12: Pet mask provides 18Kg/40Lb pet immune for wide angle

mirror only.

Standards:

Designed to comply with EN50131-1 Grade 3 / Class II,

EN50131-2-2, EN50131-2-4, EN300440, EN301489, EN60950.

Belgium standard TO14.

Sweden standard: SSF 1014.

3. INSTALLATION

3.1 General Guidance (See figure 3)

3.2 Installation Procedure (See figure 4 & 5)

3.3 Jumpers setting (See figure 5)