Vtech CS6719 User's Manual
Download Operation & user’s manual of VTech CS6719 Cordless phone, Cordless Telephone for Free or View it Online on All-Guides.com. This version of VTech CS6719 Manual compatible with such list of devices, as: CS6719, CS6719-15, CS6719-16, CS6719-2
Brand: VTech
Category: Cordless phone , Cordless Telephone , Handsets
Type: Operation & user’s manual
Model: VTech CS6719 , VTech CS6719-15 , VTech CS6719-16 , VTech CS6719-2
Pages: 2 (5.84 Mb)
1
2
Congratulations
on purchasing your new VTech product. Before
using this product, please read Important
safety instructions.
This abridged user’s manual provides you with
basic installation and use instructions. A limited
set of features are described in abbreviated form.
Please refer to the online Complete user’s
manual for a full set of installation and operation
instructions at www.vtechphones.com.
What’s in the box
Your product package contains the following
items. Save your sales receipt and original
packaging in the event warranty service is
necessary.
Handset overview
1 – Handset earpiece
2 – LCD display
3 – MENU/SELECT
• Show the menu.
• While in a menu, press to select an item, or
save an entry or setting.
4 – OFF/CANCEL
Hang up a call.
Silence the ringer temporarily while the
handset is ringing.
Press and hold to erase the missed call
indicator while the phone is not in use.
Press to return to the previous menu; or
press and hold to return to idle mode, without
making changes.
5 –
Press repeatedly to show other dialing
options when reviewing a caller ID log entr y.
6 – INT
Press to start an intercom conversation or
transfer a call (for multi-handset models only).
•
•
•
•
•
•
7 – Microphone
8 –
• Make or answer a call using the handset
speakerphone.
• During a call, press
to switch between the
speakerphone and the handset.
9 – MUTE/DELETE
Mute the microphone during a call.
Delete digits or characters while using the
dialing keys.
Silence the ringer temporarily while the
handset is ringing.
10 –
• While you have set the dial mode to pulse
and on a call, press to switch to tone dialing
temporarily.
11 –
Press to add a space when entering names.
12 – 1
• Press repeatedly to add or remove 1 in front
of the caller ID log entry before dialing or
saving it to the directory.
•
Press and hold to set or dial your voicemail
number.
13 –
/FLASH
• Make or answer a home call.
• Answer
an incoming home call when you hear
a call waiting alert.
14 – REDIAL/PAUSE
• Press repeatedly to revie
w the redial list.
•
Press and hold to insert a dialing pause while
entering a number.
15 – VOLUME/ /
• Review the directory when the phone is not in
use.
• Increase the listening volume during a call.
• S
croll up while in a menu, or in the directory,
caller ID log, or redial list.
• M
ove the cursor to the right when entering
numbers or names.
VOLUME/ /CID
Review the caller ID log when the phone is not
in use.
Decrease the listening volume during a call.
Scroll down while in a menu, or in the
directory, caller ID log, or redial list.
Move the cursor to the left when entering
numbers or names.
16 – CHARGE light
• On when the handset is charging.
•
•
•
•
•
•
•
•
Telephone base overview
1 – IN USE light
•
Flashes when there is an incoming call, or
another telephone sharing the same line is in use.
•
On when the handset is in use.
2 – /FIND HANDSET
•
Press to page all system handsets.
3 – Charging pole
4 – Charge light
Charger overview
1 – Charging pole
Display icons overview
Connect
You can choose to connect the telephone base
for desktop usage or wall mounting.
NOTE
Use only the power adapters supplied with this
product.
TIP
If you subscribe to digital subscriber line (DSL)
high-speed Internet service through your telephone
line, make sure you install a DSL filter (not
included) between the telephone line cord and
telephone wall jack. Contact your DSL ser vice
provider for more information.
Connect the telephone base
Connect the charger
•
•
Mount the telephone base
The telephone comes ready for tabletop use.
If you have already installed the telephone for
tabletop use, unplug the telephone line cord from
the telephone wall jack, and unplug the telephone
base power adapter from the wall outlet before
mounting your telephone on a wall. Follow the
steps below to mount your telephone on a wall.
Install and charge the battery
Install the battery
Install the battery as shown below.
NOTES
Use only supplied battery.
If the handset will not be used for a long time,
disconnect and remove the battery to prevent
possible leakage.
•
•
Charge the battery
Place the handset in the telephone base or the
charger to charge.
Once you have installed the battery, the
handset LCD display indicates the battery
status (see the table below).
NOTES
For best performance, keep the handset in the
telephone base or charger when not in use.
The battery is fully charged after 12 hours of
continuous charging.
Battery
indicators
Battery status Action
The screen
is blank, or
shows Put in
charger and
flashes.
The battery
has no charge
or very little
charge. The
handset cannot
be used.
Charge without
interruption
(at least 30
minutes).
The screen
shows Low
battery and
flashes.
The battery has
enough charge
to be used for a
short time.
Charge without
interruption
(at least 30
minutes).
The screen
shows
HANDSET X.
The battery is
charged.
To keep the
battery charged,
place it in the
telephone base
or charger when
not in use.
•
•
Before use
After you install your telephone or power returns
following a power outage, the handset or
telephone will prompt you to set the date and time.
Set date and time
1. Use the dialing keys (
0-9) to enter the
month (MM), date (DD) and year (YY).
Then press SELECT.
2. Use the dialing keys (
0-9) to enter the hour
(HH) and minute (MM). Then press or
to choose AM or PM.
3. Press
SELECT to save.
Check for dial tone:
Press . If you hear a dial tone, the installation
is successful.
If you do not hear a dial tone:
Make sure the installation procedures
described above are properly done.
It may be a wiring problem. If you have
changed your telephone service to digital
service from a cable company or a VoIP
service provider, the telephone line may
need to be rewired to allow all existing
telephone jacks to work. Contact your cable/
VoIP service provider for more information.
Operating range
This cordless telephone operates with the
maximum power allowed by the Federal
Communications Commission (FCC). Even
so, this handset and telephone base can
communicate over only a certain distance
- which can vary with the locations of the
telephone base and handset, the weather, and
the layout of your home or office.
When the handset is out of range, the handset
displays Out of range or no pwr at base.
If there is a call while the handset is out of
range, it may not ring, or if it does ring, the call
may not connect well when you press . Move
closer to the telephone base, and then press
to answer the call. If the handset moves out
of range during a telephone conversation, there
may be interference. To improve reception, move
closer to the telephone base.
•
•
Using the handset menu
Press MENU when the phone is not in use.
Press or until the screen displays the
desired feature menu.
Press SELECT to enter that menu.
To return to the previous menu, press CANCEL.
To return to idle mode, press and hold CANCEL.
Configure your telephone
Set language
The LCD language is preset to English. You can
select English, French or Spanish to be used in
all screen displays.
Press MENU when the handset is not in
use.
Scroll to Settings, and then press SELECT
twice.
Scroll to choose English, Français or
Español, and then press SELECT.
Press SELECT again to save.
Set date and time
Press MENU when the handset is not in
use.
Scroll to Set date/time, and then press
SELECT.
3. Use the dialing keys (
0-9) to enter the
month (MM), date (DD) and year (YY).
Then press SELECT.
4. Use the dialing keys (
0-9) to enter the hour
(HH) and minute (MM). Then press or
to choose AM or PM.
5. Press
SELECT to save.
Temporary tone dialing
If you have pulse (rotary) service only, you can
switch from pulse to tone dialing temporarily
during a call.
During a call, press .
Use the dialing keys to enter the relevant
number. The telephone sends touch-tone
signals. It automatically returns to pulse
dialing mode after you end the call.
1.
2.
3.
•
•
1.
2.
3.
4.
1.
2.
1.
2.
Telephone operation
Make a call
Press or , and then dial the telephone
number.
Answer a call
Press , , or any dialing key.
End a call
Press OFF on the handset, or put the handset
to the base or charger.
Speakerphone
During a call, press on the handset to
switch between speakerphone and normal
handset use.
Volume
During a call, press /VOLUME/ on the
handset to adjust the listening volume.
NOTE
The handset earpiece volume setting and
speakerphone volume setting are independent.
Mute
The mute function allows you to hear the other
party but the other party cannot hear you.
During a call, press MUTE on the handset
or telephone base. The screen displays
Muted.
Press MUTE again to resume the
conversation. The screen displays
Microphone ON.
Call waiting
When you subscribe to call waiting service
from your telephone service provider, you hear
an alert tone if there is an incoming call while
you are on another call.
Press FLASH to put the current call on hold
and take the new call.
Press FLASH to switch back and forth
between calls.
Find handset
Use this feature to find all system handsets.
To start paging:
Press /FIND HANDSET on the telephone
base. All idle handsets ring and display
** Paging **.
To end paging:
Press /FIND HANDSET again on the
telephone base.
•
•
•
•
•
1.
2.
•
•
•
•
BC
CS6719
CS6719-15
CS6719-16
CS6719-2
DECT 6.0 cordless telephone
Go to www.vtechphones.com
to register your product for
enhanced warranty support and
latest VTech product news.
1 set for
CS6719/
CS6719-15/
CS6719-16;
2 sets for
CS6719-2
Abridged user’s
manual
Telephones identified with this
logo have reduced noise and
interference when used with
most T-coil equipped hearing
aids and cochlear implants.
The TIA-1083 Compliant
Logo is a trademark of the
Telecommunications Industry
Association. Used under license.
T
Compatible with
Hearing Aid T-Coil
TIA-1083
Abridged user’s manual
Quick start guide
Caller I D
Announce
The ENERGY STAR
®
program
(www.energystar.gov) recognizes
and encourages the use of
products that save energy and
help protect our environment. We
are proud to mark this product
with the ENERGY STAR
®
label
indicating it meets the latest
energy efficiency guidelines.
2 Align the holes on the bracket with the
standard wall plate and slide the bracket
down until it clicks securely in place.
Route the telephone line cord through the
rectangular hole on the wall mount bracket.
Then plug the two ends of the telephone line
cord into the telephone base and the wall
outlet as shown.
1.
Connect the power adapter to the telephone
base and an electrical outlet not controlled
by a wall switch.
4.
3.
Align the grooves on the telephone base with
the tabs on the wall mount bracket, and then
slide it down until it clicks securely in place.
The battery icon flashes when
the battery is low and needs
charging.
The battery icon animates when
the battery is charging.
The battery icon becomes
solid when the battery is fully
charged.
The handset ringer is off.
There are new voicemail
received from your telephone
service provider.
ECO
The ECO mode activates
automatically to reduce power
consumption when the handset
is within range from the
telephone base.
NEW
There are new caller ID log
entries.
1 set for CS6719-2;
THIS SIDE UP
THIS SIDE UP
THIS SIDE UP
Important Safety
Instructions
a
b
c
d
e
f
g
h
i
j
n
p
o
k
l
m
a
b
c
d
A
Handset control key panel:
a