Worksaver SDM40-48 Operator's Manual

Download Owner's/operator's manual of Worksaver SDM40-48 Brush Cutter for Free or View it Online on All-Guides.com.

Brand: Worksaver

Category: Brush Cutter

Type: Owner's/operator's manual

Model: Worksaver SDM40-48 , Worksaver SDM40-60 , Worksaver SDM40-72

Pages: 40 (0.42 Mb)

Download Worksaver SDM40-48 Owner's/operator's manual

Worksaver SDM40-48 Owner's/operator's manual - Page 1
1
Worksaver SDM40-48 Owner's/operator's manual - Page 2
2
Worksaver SDM40-48 Owner's/operator's manual - Page 3
3
Worksaver SDM40-48 Owner's/operator's manual - Page 4
4
Worksaver SDM40-48 Owner's/operator's manual - Page 5
5
Worksaver SDM40-48 Owner's/operator's manual - Page 6
6
Worksaver SDM40-48 Owner's/operator's manual - Page 7
7
Worksaver SDM40-48 Owner's/operator's manual - Page 8
8
Worksaver SDM40-48 Owner's/operator's manual - Page 9
9
Worksaver SDM40-48 Owner's/operator's manual - Page 10
10
Worksaver SDM40-48 Owner's/operator's manual - Page 11
11
Worksaver SDM40-48 Owner's/operator's manual - Page 12
12
Worksaver SDM40-48 Owner's/operator's manual - Page 13
13
Worksaver SDM40-48 Owner's/operator's manual - Page 14
14
Worksaver SDM40-48 Owner's/operator's manual - Page 15
15
Worksaver SDM40-48 Owner's/operator's manual - Page 16
16
Worksaver SDM40-48 Owner's/operator's manual - Page 17
17
Worksaver SDM40-48 Owner's/operator's manual - Page 18
18
Worksaver SDM40-48 Owner's/operator's manual - Page 19
19
Worksaver SDM40-48 Owner's/operator's manual - Page 20
20
Worksaver SDM40-48 Owner's/operator's manual - Page 21
21
Worksaver SDM40-48 Owner's/operator's manual - Page 22
22
Worksaver SDM40-48 Owner's/operator's manual - Page 23
23
Worksaver SDM40-48 Owner's/operator's manual - Page 24
24
Worksaver SDM40-48 Owner's/operator's manual - Page 25
25
Worksaver SDM40-48 Owner's/operator's manual - Page 26
26
Worksaver SDM40-48 Owner's/operator's manual - Page 27
27
Worksaver SDM40-48 Owner's/operator's manual - Page 28
28
Worksaver SDM40-48 Owner's/operator's manual - Page 29
29
Worksaver SDM40-48 Owner's/operator's manual - Page 30
30
Worksaver SDM40-48 Owner's/operator's manual - Page 31
31
Worksaver SDM40-48 Owner's/operator's manual - Page 32
32
Worksaver SDM40-48 Owner's/operator's manual - Page 33
33
Worksaver SDM40-48 Owner's/operator's manual - Page 34
34
Worksaver SDM40-48 Owner's/operator's manual - Page 35
35
Worksaver SDM40-48 Owner's/operator's manual - Page 36
36
Worksaver SDM40-48 Owner's/operator's manual - Page 37
37
Worksaver SDM40-48 Owner's/operator's manual - Page 38
38
Worksaver SDM40-48 Owner's/operator's manual - Page 39
39
Worksaver SDM40-48 Owner's/operator's manual - Page 40
40
OWNER’S/
OPERATOR’S
MANUAL
MODEL NO’s
SDM40-48
SDM40-60
SDM40-72
CAUTION
For Safe Operation
Read Rules And
Instructions Carefully
SINO LEEINGLES, PIDA AYUDA
A AIGUIEN QUE SI LO LEA
PARA QUE LE TRADUZCA LAS
MEDIDAS DE SEGURIDAD.
SAFETY PRECAUTIONS
MOST ACCIDENTS OCCUR BECAUSE OF NEGLECT OR CARELESSNESS.
AVOID NEEDLESS ACCIDENTS BY FOLLOWING ALL OF THE SAFETY PRECAUTIONS LISTED BELOW.
Machinery should be operated only by those who
are responsible and are authorized to do so.
Stop the engine, lower all equipment, lock the
brakes, and remove the ignition key before dis-
mounting from the tractor.
Never stand between tractor and implement while
tractor is being backed to hitch.
Loose fitting clothing should not be worn, to avoid
catching on various parts.
Detach implement in area where children normally
do not play.
When performing adjustments or maintenance on
an implement, first lower it to the ground or block it
securely at a workable height.
Only a qualified operator should be permitted on
tractor when in operation; no riders allowed.
Make certain everyone is in the clear before starting
tractor or raising or lowering equipment.
Operate the tractor and implement only while
seated in the driver’s seat.
Reduce speed when transporting mounted
implements to avoid bouncing and momentary loss
of steering control.
A heavy load can cause instability of the tractor.
Use extreme care during road travel. Slow down on
turns and watch out for bumps. Tractor may need
front counter-weights to counter-balance the weight
of the implement.
Reduce speed on hillsides or curves so there is no
danger of tipping.
Avoid driving too close to the edge of ditches or
creeks.
Do not transport implement on public roads without
reflectors and slow moving vehicle emblem in
daylight and with approved warning lights at night
and other periods of poor visibility.
Due to the width of some implements, use extra
caution on highways, farm roads, and when
approaching gates.
Always be sure the implement is in the proper
position for transport.
Keep alert and watch the front as well as the rear
when working with the implement.
OWNER’S/
OPERATOR’S
MANUAL
MODEL NO’s
SDM40-48
SDM40-60
SDM40-72
WHEN ORDERING
REPAIR PARTS,
ALWAYS GIVE
THE FOLLOWING
INFORMATION:
1. PART NUMBER
2. PART DESCRIPTION
3. MODEL NUMBER
4. NAME OF ITEM
OCTOBER 2001
WS-RM002-OG
WORKSAVER, INC.
P.O. BOX 100 LITCHFIELD, IL 62056-0100 (217) 324-5973
WEB: http://www.worksaver.com E-MAIL: sales@worksaver.com
Equip tractors with roll-over protection
(ROPS) and keep all machinery guards in
place.
Keep children away from danger all day,
every day . . .
Please work, drive, play and live each day
with care and concern for your safety and
that of your family and fellow citizens.
MAKE EVERY DAY
A HOLIDAY
FROM ACCIDENTS
STANDARD DUTY 3-PT. MOUNTED
ROTARY CUTTER
Safety Instructions Operating Instructions Maintenance
Tractor Preparation Assembly & Mounting Repair Parts
CAUTION
THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE THOROUGHLY UNDERSTOOD
BEFORE ATTEMPTING TO BEGIN ASSEMBLING THIS MACHINE
1. Select an area for assembly that is clean and free
of any debris which might cause persons working
on the assembly to trip.
2. Do not lift heavy parts or assemblies. Use crane,
jack, tackle, fork trucks or other mechanical devices.
3. Preview the assembly instructions in your opera-
tor’s manual before proceeding further.
4. If the assembly instructions call for parts or assem-
blies to be blocked up, use only blocking material
that is in good condition and is capable of handling
the weight of the assembly to be blocked. Also
insure that the blocking material is on a clean, dry
surface.
5. Never put hands, or any part of body, under
blocked up assemblies if at all possible.
6. After completing assembly, thoroughly inspect the
machine to be sure that all nuts, bolts, hydraulic fit-
tings or any other fastened assemblies have been
thoroughly tightened.
7. Before operating the machine, thoroughly read the
operation section of your operator’s manual.
8. Before operating, read the maintenance section of
your operator’s manual to be sure that any parts
requiring lubrication, such as gearboxes, are full, to
avoid any possible damage.
9. Before operating equipment – If you have any
questions regarding the proper assembly or
operation, contact your Worksaver dealer or
representative.