Emprex D350PE Quick Start Manual
Download Quick start manual of Emprex D350PE Storage for Free or View it Online on All-Guides.com.
1
2
Version 1.0 Sep. 2007
1 GENERAL INFORMATION
This Secure Drive Enclosure kit package contains:
• HDD Enclosure
• USB cable
• Software, Driver and Manual CD
• Quick Start Guide
• Power Adapter
• Screws / Screwdriver (for applicable models only)
2 GETTING STARTED
Hardware Installation
Assembling your hard drive to the Enclosure kit
1. Open the case with a screwdriver.
2. Gently lower the hard drive to rest
against the board.
Note: The pictures are only for illustration and actual accessories may
differ from picture.
3 SETTING UP
Security Software Setup
1. Insert the Installation CD into your CD-ROM drive.
Select “Software & Win98 driver”.
2. When this screen appears,
For Windows 98/SE:
Select “Install Win98 Driver” before proceeding to next
step.
For Windows XP/Me/2000/Vista
Select “Configure to Secure Drive”.
Caution:
Configuring to Secure Drive destroys any existing data. Be sure to
back up the disk contents first.
3. When this screen appears, follow the on-screen instructions.
1) Enter【New Password】
2) Re-enter【Confirm New Password】
3) At【Hint】prompt, enter a suitable phrase to help you recall
your password later on.
4) Click【Prepare Secure Drive】
4.
When the installation is complete, please re-connect the USB
drive into the computer’s USB port for the new configuration to
take effect.
Note: In order to remove the device to take effect, you could choose either
device’ end or computer’s end (USB cable) to unplug and re-plug
the USB cable. Otherwise, system will still show the old data in the
drive.
Quick Start Guide
• Mac users please refer to Mac user guide in utility CD.
1. Pull out the tray of the
HDD case
.
2. Connect the tray to your
hard disk
3. Fasten the hard drive’s
mounting holes to the Case
F
rame with 2bigger screws.
4. Plug the LED power
connecter.
5. Push the hard disk into
the case.
6. Fasten the hard disk to the
case
7. Connect the USB/Power
cable to correct port.
8. Turn on the power switch.