EnGenius ECB1221R Quick Start Manual

Download Quick start manual of EnGenius ECB1221R Network Router, Repeater for Free or View it Online on All-Guides.com.

EnGenius ECB1221R Quick start manual - Page 1
1
EnGenius ECB1221R Quick start manual - Page 2
2
EnGenius Quick Start Guide ECB1221R Wireless Client Bridge
he ECB1221R Wireless Client Bridge operates seamlessly in the
2.4 GHz frequency spectrum supporting the 802.11b (2.4GHz,
11Mbps) and the newer, faster 802.11g (2.4GHz, 54Mbpswireless
standard. High output power and high sensitivity can extend range and
coverage to reduce the roaming between APs to get more stability
wireless connection. It also can reduce the expense of equipment in the
same environment. To protect your wireless connectivity, this device can
encrypt all wireless transmissions through 64/128-bit WEP data
encryption and also supports WPA2/WPA/802.1x for powerful security
authentication. The MAC addresses filter let you select exactly which
stations should have access to your network.
T
Top Panel
Real Panel
Label Description
LAN Ports (1 – 4) Use an Ethernet cable to connect each port to a computer on your Local
Area Network (LAN).
WAN Port Use an Ethernet cable to connect this port to your WAN router.
DC Connector Use the power cable and connect the adapter to the power socket on the
wall, and the DC inlet into the DC connector.
Antenna Connector Connect the omni-directional antenna to the SMA connector.
Connection / Activity
LED
This LED will light up once an Ethernet cable is connected to one of the
LAN ports.
WAN LED This LED will light up once an Ethernet cable is connected to WAN
(Internet) port.
WLAN LED This LED will light up once the RF (wireless LAN) feature is enabled
Power LED This LED will light up once the power cable is connected to the DC
connector.
Quick Start Guide v.1.0 ECB1221R Wireless Client Bridge 1
Please refer to the User’s Manual in the CD-ROM for complete instructions.