Talon Tools AS200100 User Manual

Download Operation & user’s manual of Talon Tools AS200100 Paper Shredder for Free or View it Online on All-Guides.com.

Brand: Talon Tools

Category: Paper Shredder

Type: Operation & user’s manual for Talon Tools AS200100

Pages: 3 (0.58 Mb)

Download Talon Tools AS200100 Operation & user’s manual

Talon Tools AS200100 Operation & user’s manual - Page 1
1
Talon Tools AS200100 Operation & user’s manual - Page 2
2
Talon Tools AS200100 Operation & user’s manual - Page 3
3
1
GENERAL SAFETY RULES
GB
MODEL NO. AS200100
USER MANUAL
Garden Shredder
6096-200120
IMPORTANT:
It is vital that you retain and thoroughly read and understand these safety and operating
instructions. Incorrect use will make this machine inoperable.
WARNING! When using electric tools, basic safety precautions, including the following, should always be followed to
reduce the risk of fire, electric shock and personal injury.
Read all these instructions before operating this product and save these instructions.
Meaning of symbols marked on the product
Read the user manual before using the machine
Wear safety goggles to protect your eyes
Wear ear protection to protect against noise
Wear dust mask to protect against dust
Wear gloves to protect your hands
Wear safety boots to protect against electric shock
Keep work area clean
Cluttered areas and benches invite injuries.
Consider work area environment
Do not expose power tools to rain. Do not use power
tools in damp or wet locations. Keep work area well lit.
Do not use power tools where there is risk to cause fire
or explosion.
Guard against electric shock
Avoid body contact with earthed or grounded surfaces
(e.g. pipes, radiators, ranges or refrigerators).
Keep children away
Do not let visitors touch the tool or extension cord. All
visitors should be kept away form area.
Store idle tools
When not in use, tools should be stored in a dry, high
or locked up place, out of reach of children.
Do not force the tool
It will do the job better and safer at the rate for which it
was intended.
Use the right tool
Do not force small tools or attachments to do the job of
a heavy duty tool. Do not use tools for purposes not
intended; for example, do not use circular saws to cut
tree limbs or logs.
Dress properly
Do not wear loose clothing or jewellery, they can be
caught in moving parts. Rubber gloves and non-skid
footwear are recommended when working outdoors.
Wear protective hair covering to contain long hair.
Use safety glasses
Also use face or dust mask if the cutting operation is
dusty.
Do not abuse the cord
Never carry the tool by the cord or yank it to disconnect
it from the socket. Keep the cord away from heat, oil
and sharp edges.
Do not overreach
Keep proper footing and balance at all times.
Maintain tools with care
Keep cutting tools sharp and clean for better and safer
performance. Follow instructions for lubrication and
changing accessories. Inspect tool cord periodically
and if damaged have it repaired by an authorized serv-
ice facility. Inspect extension cords periodically and
replace, if damaged. Keep handles dry, clean and free
from oil and grease.
Disconnect tools
When not in use, before servicing and when changing
accessories such as blades, bits and cutters.
Remove adjusting keys and wrenches
Form the habit of checking to see that keys and adjust-
ing wrenches are removed from the tool before turning
it on.
Avoid unintentional starting
Do not carry a plugged-in tool with a finger on the
switch. Ensure switch is off when plugging in.
Use outdoor extension cords
When tool is used outdoors, use only extension cords
intended for outdoor use.
Stay alert
Watch what you are doing. Use common sense. Do not
operate tool when you are tired.
Check damaged parts
Before further use of the tool, a guard or other part that
is damaged should be carefully checked to determine
that it will operate properly and perform its intended
function. Check for alignment of moving parts, free run-
ning of moving parts, breakage of parts, mounting and
any other conditions that may affect its operation. A
guard or other part that is damaged should be properly
repaired or replaced by an authorized service center
unless otherwise indicated in this instruction manual.
Have defective switches replaced by an authorized
service facility. Do not use the tool if the switch does
not turn it on and off.
WARNING!
The use of any accessory or attachment, other than
those recommended in this instruction manual, may
present a risk of personal injury.
Have your tool repaired by a qualified person
This electric tool is in accordance with the relevant
safety requirements. Repairs should only be carried out
by qualified persons using original replacement parts,
otherwise this may result in considerable danger to the
user.
WARNING!
This tool must not be used by anyone under 16 years
of age.
You have a responsibility of safety to others when you
are operating this tool.