• Home
• Brands
• Epic Fitness Manuals
• Epic Fitness View 550 Treadmill
• Epic Fitness View 550 Treadmill Manual

Epic Fitness View 550 Treadmill Manual

Download Manual  of Epic Fitness View 550 Treadmill Other, Treadmill for Free or View it Online on All-Guides.com.

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

17

5. Follow your progress with the displays.

The matrix—When

y

ou select the manual

mode, the matrix will

d

isplay a track that rep-

resents 1/4 mile (400

meters). As you exer-

cise, the indicators around the track will appear in

succession until the entire track appears. The track

will then disappear and the indicators will again

begin to appear in succession.

The Time/Incline dis-

play—The Time/Incline

display can show the

elapsed time. The dis-

play can also show the

incline of the treadmill

for several seconds each time the incline changes.

Press the Display button below the Time/Incline

display until the display shows the information that

you are most interested in viewing. Note: When a

workout is selected, the display will show the time

remaining in the workout instead of the elapsed

time.

The Calorie/Pulse dis-

play—The

Calorie/Pulse display

can show the approxi-

mate number of calo-

ries you have burned.

The display will also show your heart rate when

you use the handgrip pulse sensor or the optional

chest pulse sensor.

The Distance/Speed

display—The

Distance/Speed display

will show the distance

that you have walked or

run and the speed of

the walking belt for a few seconds each. Press the

Display button below the Distance/Speed display

until the display shows the information that you are

most interested in viewing.

To reset the console, press the Start/Stop button,

remove the key, and then reinsert the key.

6. Measure your heart rate if desired.

Note: If you use the handgrip pulse sensor and

the optional chest pulse sensor at the same

time, the console will not display your heart

rate accurately. See page 26 for information

about the optional chest pulse sensor.

Before using

t

he handgrip

pulse sensor,

remove the

sheets of plas-

tic from the

metal contacts.

In addition,

make sure that

your hands are

clean.

To measure your heart rate, stand on the foot

rails and hold the metal contacts on the handrail

for approximately ten seconds—avoid moving

your hands. When your pulse is detected, several

dashes will appear in the display and then your

heart rate will be shown. For the most accurate

heart rate reading, continue to hold the con-

tacts for about 15 seconds.

7. Turn on the fans if desired.

The fans feature high and low speed settings.

Press the Fans button repeatedly to select a fan

speed or to turn off the fans. Note: If the fans are

on when the walking belt is stopped, the fans will

turn off automatically after a few minutes.

8. When you are finished exercising, remove the

key from the console.

Step onto the foot rails, press the Start/Stop but-

ton, and adjust the incline of the treadmill to the

lowest setting. The incline must be at the low-

est setting when you fold the treadmill to the

storage position, or you may damage the tread-

mill. Next, remove the key from the console and

put it in a secure place.

When you are finished using the treadmill, press

the power switch into the off position and unplug

the power cord. IMPORTANT: If you do not do

this, the treadmillʼs electrical components may

wear prematurely.

Contacts