• Home
• Brands
• Epic Fitness Manuals
• Epic Fitness View 550 Treadmill
• Epic Fitness View 550 Treadmill Manual

Epic Fitness View 550 Treadmill Manual

Download Manual  of Epic Fitness View 550 Treadmill Other, Treadmill for Free or View it Online on All-Guides.com.

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

25

6. Scan and save channels.

Select CATV or AIR. Select CATV to receive cable

c

hannels through the 75 ohm terminal on the

treadmill. Select AIR to receive channels through

a

n antenna.

To scan for available channels, highlight AUTO

SCAN or AUTO SCAN ADD CH. To scan all chan-

nels, select the Auto scan option. To scan all chan-

nels and add an extra channel, select the Auto

Scan Add Ch option. The scan channel submenu

will appear.

If you are receiving

channels through a

CATV cable, high-

light CABLE SYS-

TEM and select the

auto, STD, IRC, or

HRC setting. Try all

four cable settings,

if necessary, to find

the optimal setting.

Highlight START TO SCAN and press the Volume

increase button to start the auto scan. The televi-

sion will begin scanning all of the channels avail-

able in your area. When no signal is detected on a

channel, the channel will be skipped. When a sig-

nal is detected, the channel will be saved into

memory and the next channel will be selected. This

process will continue until the highest channel is

reached. The television will renumber the channels

in the order in which it locates them. Do not re-

move the key while the television is scanning

channels. Note: If a television channel disappears,

scan for channels again.

After all valid chan-

nels available in

your area have been

s

aved into the televi-

sionʼs memory, you

c

an manually skip

unwanted channels.

To skip a channel,

highlight CHANNEL SKIP and press the Volume

increase button on your remote control. In the

channel skip submenu, press the Channel increase

and decrease buttons to highlight the desired

channel and the Volume increase and decrease

buttons to turn on or turn off the skip option.

Continue this process until you have skipped all

unwanted channels.

To change the dis-

play name of a

channel, highlight

CHANNEL NO. and

select a channel.

Then, highlight

CHANNEL LABEL

and press the

Volume increase button to enter the channel label

submenu. Press the Volume increase and de-

crease buttons to select a number or letter box.

Then press the Channel increase and decrease

buttons to select the desired number or letter.

7. Exit the Menu.

When you have finished adjusting the settings,

press the Exit button.

No.

"MENU": EXIT

"ENTER": SELECT

Program Name Skip

4-1 FD 3803 Off

9

-2 KQUED-SD Off

EDIT SELECT "MENU": EXIT

FD 3 8 30

Cable System

UP/DOWN ADJUST "MENU": EXIT

Start to Scan

AUTO