Epson Artisan 800 Quick Setup Instructions Manual

Download Quick start manual of Epson Artisan 800 Adapter, All in One Printer for Free or View it Online on All-Guides.com.

Epson Artisan 800 Quick start manual - Page 1
1
Epson Artisan 800 Quick start manual - Page 2
2
Epson Artisan 800 Quick start manual - Page 3
3
Epson Artisan 800 Quick start manual - Page 4
4
Epson Artisan 800 Quick start manual - Page 5
5
Epson Artisan 800 Quick start manual - Page 6
6
Epson Artisan 800 Quick start manual - Page 7
7
Epson Artisan 800 Quick start manual - Page 8
8
*411555700*
*411555700*
Canada only: For French speakers, remove the sticker from the backing sheet and
place it on the right side of the control panel.
Caution: Do not open ink cartridge packages until you are ready to install the ink.
Cartridges are vacuum packed to maintain reliability.
If anything is missing, contact Epson as described on the back
under “Any questions?”.
Remove all protective materials.
1 Raise the scanner and remove the transportation lock.
2 Store the transportation lock as
shown.
3 Lower the scanner.
Unpack
1
Start Here
Make settings
3
1 Select your language and country.
Touch the screen to select the desired option. Press or to see more
countries.
2 For the Daylight Saving Time setting, select Summer if your region uses
Daylight Saving Time and it’s currently in effect. (DST is effective from
spring through summer.) Otherwise, select Winter to turn off the setting.
Press OK.
3 Select the date format.
4 Use the numeric keypad to set the date, then press OK.
5 Select the time format.
6 Use the numeric keypad to set the time.
7 Press OK when done.
Note: You can change the date and time settings by pressing the Home button,
selecting Setup, selecting Printer Setup, then Date/Time.
2 Squeeze the edge guides and slide them out. Then insert paper with the
glossy or printable side face-down.
3 Slide the edge guides against the paper.
4 Lower the photo tray.
5 Squeeze the edge guides and slide them out. Then insert 4 x 6-inch or
5 x 7-inch photo paper with the glossy or printable side face-down.
Note: Make sure the paper fits under the edge guides.
6 Slide the edge guides against the paper.
7 Keep the cassette flat as you insert it.
8 Extend the output tray and flip up the stopper.
5
Load paper
Install ink cartridges
4
Note: Don’t load paper before installing the ink cartridges.
1 Raise the scanner.
2 Unpack the ink cartridges.
3 Remove only the yellow tape from each cartridge.
Caution: Don’t remove any other seals from the cartridges.
4 Insert the cartridges in the holder for each color. Press the cartridges
down until they click.
5 Lower the scanner.
6 Wait while ink charges. Charging takes about 5 minutes.
Note: Your Artisan 800 Series ships with full cartridges. Part of the ink from
the first cartridges is used for priming the Artisan 800 Series. Replacement
cartridges will print more pages.
Caution: Don’t turn off the Artisan 800 Series while the ink system is
initializing or you’ll waste ink.
(Included for
Canada only)
1 Connect the power cable.
Caution: Do not connect to your
computer yet.
Turn on and adjust
2
Series
2 Press the On button, then lift the
control panel to raise it.
To lower the control panel, press the
Unlock button.
Caution: To avoid damaging your Artisan 800
Series, always press the Unlock button to lower
the control panel.
The paper cassette has 2 trays. The main tray is for letter-size, legal-size,
or 8 x 10-inch paper. The photo tray is for 4 x 6- or 5 x 7-inch photo paper.
1 Pull out the paper cassette. Then slide back the photo tray and lift it up.
Ethernet cable
(gray)
Phone cord
(black)
Power cord