Tascam DV-RA1000 Quick Reference Manual
Download Quick reference manual of Tascam DV-RA1000 DVR, Recording Equipment for Free or View it Online on All-Guides.com.
Brand: Tascam
Category: DVR , Recording Equipment
Type: Quick reference manual for Tascam DV-RA1000
Pages: 4 (0.17 Mb)
1
2
3
4
1
Setting the reference clock (word sync, etc.)
Before using the DV-RA1000 with other digital equipment, you must set up the audio system so that
one unit acts as the system clock master. e DV-RA1000 can act as a clock master or as a slave.
☞
Press the MENU key.
☞
Use the wheel to highlight SYSTEM SETUP, and press the ENTER key.
☞
Use the wheel to highlight REFERENCE CLOCK, and press the ENTER key.
☞
Use the wheel to select the SOURCE as either INTERNAL (the DV-RA1000 acts as the system sync master),
WORD (the sync clock is input through the WORD SYNC IN BNC connector) or DIGITAL IN.
☞
Press ENTER to make the setting and return to the SYSTEM SETUP screen.
NOTE that when recording a DSD project, the clock may be either internal, or
input through the dedicated WORD SYNC IN BNC connector. In either case, the
clock is 44.1kHz. Also remember that when loading a project, the sampling fre
-
quency of the DV-RA1000 changes to match that of the project.
Making connections
Analog connections: use the XLR ANALOG jacks
for connecting to and from +4 dBu equipment,
and the RCA jacks for –10 dBV equipment.
Digital connections: use the RCA (pin) jacks for
S/PDIF connections. ese can be used at dou-
ble-speed for 88.2 and 96 kHz projects.
Use the XLR
DIGITAL jacks for connecting AES/
EBU equipment. Use two connectors (1 and 2)
for double-wire 88.2 or 96kHz recording, or for
quad-rate recording.
Use the BNC
SDIF-3/DSD-raw connectors (one
per channel) for DSD recording.
Use the BNC
WORD SYNC connectors for mak-
ing system word sync connections.
‰ DV-RA1000 Œ Quick Reference Guide
D00847600A
Before you start
Use the DV-RA1000 to record and play back
UDF-format discs containing audio files on
DVD+RW media, as well as using it to create Red
Book audio CDs on standard CD-R and CD-RW
media.
e audio files created on UDF DVD+RW discs
can be played back on the DV-RA1000, and
transferred, using a USB connection, to a digital
audio workstation for editing and mastering.
e 24-bit audio files are organized on the disc
within projects (maximum of 99 files/project)
and the files within a project are all the same
sampling frequency, but a single disc may con
-
tain up to 99 projects of different sampling fre
-
quencies.
✱
Note that when turning the DV-RA1000 off aer recording on DVD+RW media, you should either eject
the disc first (short press of OPEN/CLOSE) or shut down the unit by holding down the OPEN/CLOSE
(SHUT DOWN) key to write all information to disc.