• Home
• Brands
• Epson Manuals
• Epson 826W - PowerLite WXGA LCD Projector
• Epson POWERLITE 85+ User Manual

Epson POWERLITE 85+ User Manual

Download Quick setup of Epson 826W - PowerLite WXGA LCD Projector Monitor, Projector for Free or View it Online on All-Guides.com.

1

2

3

4

Quick Setup

Before using the projector, make sure you read the safety instructions in the

User’s Guide on your projector CD.

Connect the projector

Choose from the following connections:

Computer Monitor Port

Connect a computer using the VGA cable that came with the projector.

Connect one end to the projector’s Computer1 or Computer2 port, and the

other end to your computer’s monitor port. If you are using a notebook,

switch it to external display. You can also connect an audio cable to the

Audio1 or Audio2 port.

Computer USB Port

Connect a computer (Windows

®

2000 SP4 or later or Mac OS

®

X 10.5.1-10.6)

using the USB cable that came with the projector.

Connect the square end of the USB cable to the projector’s TypeB

(square) USB port. Connect the flat end of the cable to any USB port on your

computer. Then turn on your projector (see “Turn on your equipment”). You

can also connect an audio cable to the Audio2 port.

Follow the on-screen instructions to install the Epson USB Display software

(with Mac OS X, first double-click the USB Display Installer icon that appears

on your computer screen). Then press the USB button on the remote control.

(You need to install the software only the first time you connect.)

Network (LAN)

Connect the projector to your network using an Ethernet

®

cable. See “Project

Over the Network” on the back of this sheet for more information.

Microphone

Connect a dynamic or condenser microphone to the Mic port, using a 3.5 mm

mini-jack cable.

NOTE: If you’re using a condenser microphone, set the Plug-in Power setting

to On. See the User’s Guide on your projector CD for more information.

Video Player

Connect up to 4 video devices and use the remote control to switch between

them.

RCA video cable

(composite video)

(optional)

S-Video

cable

(optional)

Component-to-

VGA cable

(optional)

Audio cable

(optional)

Camera or USB Device

Connect a digital camera, document camera (Epson DC-06 document camera),

or other USB device to the projector’s TypeA (flat) USB port.

If you connect a digital camera or USB storage device, you can use the

projector’s Slideshow feature to present JPEG images. See the User’s Guide on

your projector CD.

For information on playing sound through the projector or connecting an

external monitor, see the User’s Guide on your projector CD.

Turn on your equipment

1

Turn on your computer or video source.

2

Plug in the projector.

3

Open the A/V Mute slide all the way.

4

Press the power button on the projector or remote control.

Power light

Power button

The power light flashes green, then stays on.

NOTE: To shut down the projector, press the power button twice, wait for

the two confirmation beeps, then unplug it. You don’t have to wait for the

projector to cool down.

Adjust the image

1

If you don’t see an image, press the Source Search button on the

projector or remote control to select the image source.

NOTE: If you still see a blank screen or have other display problems, see

the troubleshooting tips on the back of this sheet.

2

To raise the image, press the foot release button and lift the front of the

projector. Release the button to lock the foot in position.

3

Turn the focus ring to sharpen the image.

Turn the zoom ring to reduce or enlarge the image.

Zoom

Focus

4

If your image looks like or , you’ve placed the projector off to

one side of the screen at an angle. Place it directly in front of the center

of the screen, facing the screen squarely.

5

If your image looks like or , press the or buttons on the

projector to correct it.

Using the remote control

Make sure the batteries are installed as shown (two AA batteries).

Change

presentation

slides (USB cable

connection only)

Navigate

projector

menus

Choose which

source to display

Control projector volume

Turn projector

on and off

Turn off projector

display and sound

Open a menu item

assigned by the user

You can use the remote control to operate the projector. With the USB cable,

you can use the remote as a wireless mouse. For more information on using

the remote control, see the User’s Guide on your projector CD.

PowerLite

®

85+/825+/826W+

4118552 Rev.0

1-F C

4118552 Rev.0

1-F M

4118552 Rev.0

1-F Y

4118552 Rev.0

1-F K