Epson PowerLite 61p Lamp Replacement Update

Download Lamp replacement update of Epson PowerLite 61p Monitor, Projector for Free or View it Online on All-Guides.com.

Brand: Epson

Category: Monitor , Projector , Scanner

Type: Lamp replacement update

Model: Epson PowerLite 61p , Epson PowerLite 81p

Pages: 2 (0.41 Mb)

Download Epson PowerLite 61p Lamp replacement update

Epson PowerLite 61p Lamp replacement update - Page 1
1
Epson PowerLite 61p Lamp replacement update - Page 2
2
Lamp Replacement Update
Please substitute the lamp replacement instructions below for the instructions in your Epson
®
PowerLite
®
61p/81p User’s Guide:
1. Press the P
Power button twice to turn off the projector. When the projector beeps twice,
unplug the power cord.
2. If the projector has been on, allow it to cool down for at least an hour (or until the lamp is cool).
Warning: Let the lamp cool before replacing it. If the lamp breaks, handle the shards carefully to
avoid injury.
3. Use a screwdriver to loosen the screw holding the lamp cover. (The cover is on top of the
projector.)
4. Slide the cover out, then lift it off.
5.
6. Use the screwdriver to loosen the two screws holding the lamp in place. You can’t remove them.
7.
Turkey lamp replacement slipsheet.fm Page 1 Wednesday, June 30, 2004 12:16 PM