• Home
• Brands
• Epson Manuals
• Epson PowerLite 9300i - PowerLite 9300NL Multimedia Projector
• Epson PowerLite 9300i Quick Setup

Epson PowerLite 9300i Quick Setup

Download Quick setup of Epson PowerLite 9300i - PowerLite 9300NL Multimedia Projector Monitor, Projector for Free or View it Online on All-Guides.com.

1

2

1

Turn on your notebook.

2

Remove the projector’s lens cover.

3

Make sure the power light

is orange and not flashing.

4

Press the Power button

to turn on the projector.

S

T

A

R

T

H

E

R

E

Turn on your equipment

C

onnect the projector

to your notebook

Follow these instructions to connect the projector to your

notebook. For other setup options, see your User’s Guide.

EPSON

®

PowerLite

®

9300i

Quick Setup

1

Locate the required cables:

2

Connect the computer cable to the

Computer 1 port on the projector.

3

Connect the other end to your notebook’s video-out

or monitor port.

NOTE: If your notebook has a DVI connector, you need to either

use a DVI-to-VGA adapter with the included computer cable (see

your computer’s documentation), or purchase an optional DVI

cable (for a higher-quality image). See your User’s Guide.

4

Connect the power cord to the

projector, then plug the other end

into a grounded electrical outlet.

Power cord Computer cable

Power light is orange

and not flashing

1

If you’ve turned on your notebook and you don’t see an image, press

the Computer/DVI button on the projector to select the image source.

NOTE: If you still see a blank screen or have other display problems,

see the troubleshooting tips on the back of this sheet.

2

Adjust the sharpness, size, and height of the image:

3

If your image looks like or , you’ve placed the projector off to

one side of the screen at an angle. Place it directly in front of the

center of the screen, facing the screen squarely.

4

If your image looks like or , use the Keystone buttons to

square up the image.

Lens Shift

to adjust the

image height

Zoom

to adjust the

image size

Focus

to sharpen

the image

Adjust the image

CAUTION: Before unplugging the projector...

To shut down the projector properly:

1. Press the Power button twice. Let the projector cool while

the power light flashes orange (about 30 seconds).

2. Once the light stops flashing and stays on, it’s safe to unplug

the projector.

Never unplug the projector when the power light is green or

flashing orange.

Power button

Turn over

Select an

image source