TDK Varistors(SMD) AVF16 Series Brochure

Download Specifications of TDK Varistors(SMD) AVF16 Series Computer Hardware for Free or View it Online on All-Guides.com.

TDK Varistors(SMD) AVF16 Series Specifications - Page 1
1
TDK Varistors(SMD) AVF16 Series Specifications - Page 2
2
(1/2)
002-03 / 20080929 / e9c11_avf.fm
• All specifications are subject to change without notice.
Varistors(SMD)
For High-speed Differential Signal Line
AVF16 Series
A low-voltage varistor applicable in high frequencies has been manufactured by using TDK circuit and material technology.
FEATURES
Chip size: 1608 (L1.6× W0.8mm), applicable in 2 Line-in 1 (2in1)
differential line.
2GHz or more of cutoff frequency in differential mode (Sdd21).
Superior electrostatic absorption characteristics due to reduction
of varistor voltage.
Meeting Electrostatic Discharge Test IEC61000-4-2, HBM
(human body model) contact 8kV.
APPLICATIONS
Protective circuit for high-speed differential signal from static
electricity
HDMI, USB, IEEE1394, etc.
SHAPES AND DIMENSIONS RECOMMENDED PC BOARD PATTERNS
CIRCUIT DIAGRAM
ELECTRICAL CHARACTERISTICS
Conformity to RoHS Directive
1.6±0.1
P=0.5typ.
0.18typ.
0.8±0.1
0.25±0.1
±0.005
0.5±0.1
0.25±0.1 0.25±0.1
±0.065
Dimensions in mm
0.12
+0.05
–0.12
0.25
+0.05
–0.25
0.25typ.
0.12typ. 0.25typ.
264
153
NC
1
NC
1
PP
Mark
2
1
Do not solder the terminal NC(not connected) with land etc.
2
Mark is unrelated to the polarity (directionality) of the terminal.
0.18
+0.05
–0.10
Dimensions in mm
0.25
Area of solder resist
0.4
0.5
0.80.4
1.2
0.1
0.6
IN1 GND IN2
OUT1 GND OUT2
NCNC
Transmission line
Not externally connectable
: Terminal for internal circuit connection
Part No.
Varistor voltage
V1mA
(V)
Maximum
continuous
voltage
Edc(V)
Cut-off
frequency
[Sdd21]
(GHz)
AVF16C212A000F205 12 5.5 2 min.
AVF16C225A000F405 25 5.5 4 min.
Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.