TEAC DV-W50PUK Quick Installation Manual
Download Quick installation manual of Teac DV-W50PUK Computer Accessories for Free or View it Online on All-Guides.com.
Brand: Teac
Category: Computer Accessories
Type: Quick installation manual for Teac DV-W50PUK
Pages: 4 (0.29 Mb)
1
2
3
4
page 1
The TEAC DV-W50PUK is a modern high per-
formance DVD-R/RW drive. It offers reading
speeds of 12x for DVD-ROM media and 32x for
CD-ROM media. The maximum writing speed is
rated to 4x for DVD-Rs, to 2x for DVD-RWs, 16x
for CD-Rs and 8x for CD-RWs. DVD-Rs and
DVD-RW media allow to store up to 4.7GB.
Very important:
TEAC assumes no responsibility for data
loss caused by the operation that is not
in accordance to this document, or data
loss caused by natural disaster, fire,
power outage, or spontaneous defect of
this product.
Components
Drive unit, AC adapter, USB interface cable, CD
with software, 1 CD-R, quick Installation Guide,
warranty booklet
System Requirements
PC/AT compatible machine with a USB 1.1 or
USB 2.0 interface, CPU Intel Pentium III 600MHz
or more, main memory of 128MB or more, mini-
mum 10GByte free HDD capacity, 24 bit Colour
Graphic Display with 1024 x 768 resolution
Conforming OSes
Microsoft Windows 98 Second Edition, Microsoft
Windows Me, Microsoft Windows 2000 Profes-
sional, Microsoft Windows XP Home Edition/Pro-
fessional
The drive does not conform to Windows 95, Win-
dows 98 and MS-DOS.
Setting up the drive
Windows Me, Windows 2000 and Windows XP
operating systems have the native drivers for
USB controller and TEAC DV-W50PUK. There-
fore, when this drive is connected, Windows will
automatically install the appropriate driver and
the drive will be ready to be used. You do not
have to perform any special installation or
uninstallation.
TEAC DV-W50PUK DVD-R/RW Drive
Quick Installation Guide
However, it is required that the device driver be
installed from the CD provided with this product
when you use Windows 98 Second Edition (Win-
dows 98SE). Set the provided CD in one CD-
ROM drive (not in the USB drive) of your com-
puter.
Very important:
Do not connect the drive if your PC is in
sleep or in suspend mode. Prior to con-
nect the drive you have to set your PC
in the normal mode of operation.
(1) Turn on the power of the computer and wait
for the desktop screen to appear.
(2) Connect the DC output plug of the provided
AC adapter to the DC input connector of the
drive.
0
ON
OFF
DC
IN
+5V
+12V
Audio
(3) Connect the other DC plug of the provided
AC adapter to an outlet. Set the power switch
of your USB drive to on.
(4) Connect the drive and the computer using
the provided USB cable. Insert the mini B
plug of the provided USB connector to the
USB connector at the back of the drive.
0
ON
OFF
DC
IN
+5V
+12V
Audio