• Home
• Brands
• Teac Manuals
• Teac -380467-003 - COMPAQ PRESARIO C300 C500 C700 F500 F700 LAPTOP CHARGER
• Teac 8886 - Photosmart Camera Dock Digital Docking Station Introduction Manual

Teac 8886 - Photosmart Camera Dock Digital Docking Station Introduction Manual

Download Introduction manual of Teac -380467-003 - COMPAQ PRESARIO C300 C500 C700 F500 F700 LAPTOP CHARGER Desktop for Free or View it Online on All-Guides.com. This version of Teac -380467-003 - COMPAQ PRESARIO C300 C500 C700 F500 F700 LAPTOP CHARGER Manual compatible with such list of devices, as: -380467-003 - COMPAQ PRESARIO C300 C500 C700 F500 F700 LAPTOP CHARGER, 8886 - Photosmart Camera Dock Digital Docking Station, KN844UA#ABA - Pavilion Dv6693us - Turion 64 X2 2 GHz, Pavilion 7700 - Desktop PC, Pavilion 8700 - Desktop PC

1

2

3

4

5

6

7

8

Recommended Software

TEAC CD-RW Installation Guide 6

7. Re-install your computer’s cover, faceplate, or bay cover.

8. Start your system.

Recommended Software

Before you can record data onto CD-R or CD-RW discs using your TEAC CD-RW

Drive, you must first install pre-mastering or packet-writing software onto your

computer’s hard disk. TEAC recommends the following applications for Windows

95/98/Me/2000-Professional and NT:

❑

Adaptec Easy CD Creator, Version 4.02d or higher:

A full-featured

premastering software application that enables you to create audio CDs and data

CDs.

❑

Adaptec DirectCD, Version 3.01d or higher:

A “drag & drop” software

application that allows you to read and write to your CD-RW as if it were a

standard floppy or removable hard drive. It also provides the tools necessary to

format the media.

For more information, refer to the documentation that accompanies the software.

Notes:

• The IDE CD-RW drive is a true Plug-N-Play device; therefore, it will be

detected automatically by Windows 95/98/Me/2000-Professional. There is no

need to install any drivers.

• Windows NT 4.0 Users:

Windows NT 4.0 does not support the Plug-N-Play feature. Therefore, confirm

that the IDE CD-ROM DRIVE ATAPI version 1.2 driver is installed. If not,

open the Control Panel, double click “SCSI Adapters,” click the “Drivers” tab,

then click the “Add” button. At the “Select a SCSI Adapter Option” window,

select “IDE CD-ROM DRIVE (ATAPI Ver 1.2).” Click “Install” and follow

the instructions on screen.

• The drive is recognized by the operating system as a typical CD-ROM drive.

Once you confirm that you can read (play) data discs from the CD-RW drive,

install the premastering software to enable recording to CD-R and CD-RW

discs.

• The premastering software is to be purchased separately.

Note:

The above mentioned software packages are part of the Easy CD Creator

Deluxe Software Suite from Adaptec. Please ensure the appropriate version is

purchased.

CDRW8x8x32short.fm Page 6 Thursday, October 19, 2000 9:58 PM