• Home
• Brands
• Teac Manuals
• Teac DP-004
• TEAC DP-004 Instructions

TEAC DP-004 Instructions

Download Instructions of Teac DP-004 Music Mixer for Free or View it Online on All-Guides.com.

1

2 TASCAM DP-004

CAUTION

When you updated the firmware, make sure that the

batteries have enough remaining power or use an optional

AC adapter (PS-P520). The program has been set so that

the update will not be conducted if battery power is

insufficient.

1 Download the most recent firmware from the

TASCAM web site (http://www.tascam.com).

2 Turn the unit’s power ON and use the included

USB cable to connect it with a computer. This

unit will be recognized as an external drive

(external storage device) by the computer.

3 Copy the downloaded firmware to the

UTILITY folder on the DP-004.

4 After copying has completed, disconnect the

unit from the computer following the correct

procedures, remove the USB cable and turn the

unit power OFF.

5 While pressing and holding both the REPE AT

and UN/REDO keys, turn the unit power ON.

Theunitstartsupinupdatemode,andtheupdatele

appears on the screen.

NOTE

This screen shows a list of the firmware update files •

inside the UTILITY folder of the unit. “No Update File”

appears if there is no update file in the UTILITY folder.

The screen shown is an example. The actual display •

differs.

CAUTION

If this screen does not appear, turn the power OFF. Then

while pressing and holding both the REPEAT and UN/REDO

keys, turn the unit’s power ON again. Continue to press

and hold the REPEAT and UN/REDO keys firmly until this

screen appears.

6 Select the firmware (highlight the item) using

F1 (§) and F2 (¶), then press F4 (

NEXT

). The

following screen appears.

The current version appears on the left and the

updated version appears on the right.

NOTE

The screen shown is an example. The actual display differs.

7 Press the F3 (

YES

) key to start the update.

8 When the update is complete, the power turns

OFF automatically. Turn the power ON again.

9 Follow the “Confirmation of firmware version”

instructions above to check that the “System

Version” is now the most recent version of the

firmware.

This completes the procedure for updating this unit.

10 Connect to a computer with USB and delete

the firmware update from the unit’s UTILITY

folder.

Firmware update procedures

Printed in China

DP-004

Release Notes

Confirmation of firmware version

ConrmthermwareversionofyourDP-004before

conductingarmwareupdate.

1 Turn the unit’s power ON.

2 Press the MENU key to open the

MENU

screen,

select "

INFORMATION

" and press the F4 (¥)

key.

3 When the INFORMATION screen appears,

press F4 (

NEXT

) three times so the screen

changes to

F/ W (4 /4)

to confirm the

"System Version".

Youdonotneedtoupdatetheunit’srmwareif

the version shown is the same as or newer than the

version that you intend to use for the update.

E_DP-004_RN_RevB.indd 2 09.2.6 10:08:11 AM