Epson PowerLite 600p Quick Setup

Download Quick setup of Epson EMP-811 - XGA LCD Projector Projector for Free or View it Online on All-Guides.com. This version of Epson EMP-811 - XGA LCD Projector Manual compatible with such list of devices, as: EMP-811 - XGA LCD Projector, PowerLite 600p, PowerLite 800p, PowerLite 811p, PowerLite 820p

Epson EMP-811 - XGA LCD Projector Quick setup - Page 1
1
Epson EMP-811 - XGA LCD Projector Quick setup - Page 2
2
1
Make sure your projector and laptop are turned off.
2
Connect one end of the computer cable to the
Computer/Component Video port on the projector.
3
Connect the other end to your laptop’s video
or monitor port.
S
T
A
R
T
H
E
R
E
Connect the power cord to your projector and plug the other end into a grounded outlet.
Turn over
Plug in your projector
Connect the projector
to your laptop
Follow these instructions to connect the projector
to your laptop. To connect other devices, such as
a VCR or desktop PC, see your User’s Guide.
power button
power light
EPSON
®
PowerLite
®
600p/811p/820p
Quick Setup
Press the red Power button twice, then let the projector cool while the power
light flashes orange (about a minute and a half). Once the light stops flashing
and stays on, it’s safe to unplug the projector.
Never unplug the projector when the power light is green or flashing orange.
Caution: Before unplugging the projector...
For most setups, you’ll need just these two cables:
power cord computer cable
1
Remove the lens cover.
2
Turn on the projector first. To do so, press the red Power button.
The power light flashes green as the projector warms up,
and the projection lamp comes on in about 30 seconds.
3
Turn on or restart your laptop. (Windows
®
only: If you see a
New Hardware Wizard screen for a Plug and Play monitor, click Cancel.)
Turn on your equipment