TEFAL FV9240 PROGRAM 8 Manual
Download Manual of TEFAL FV9240 PROGRAM 8 Thermostat for Free or View it Online on All-Guides.com.
1
2
3
4
5
6
7
8
9
10
11
12
Auto-Stop safety warning light
(depending on model)
8-program
control panel
Water tank filler
hole
Shot of Steam Button
Spray Button
Thermostat
indicator light
Electric power
cord
Ergonomic grip
Program selector
Integral anti-scale
system
Spray
Soleplate
“Thermo-Alert” light
(depending on model)
Anti-calc valve release
button
Dry/Steam
control
Extra-large heel with
non-slip pad
English
047213 38/04
Please read these instructions carefully and keep them for future reference.
What water to use ?
Your appliance has been designed to function with untreated tap water. However, it is
necessary to operate the Self-Clean function regularly in order to eliminate hard water
deposits from the steam chamber.
If your water is very hard (check with your local water authority), it is possible to mix
tap water with store-bought distilled or demineralised water in the following
proportions : - 50% tap water, - 50% distilled or demineralised water.
Types of water not to use
Heat concentrates the elements contained in water during evaporation.The types of
water listed below contain organic waste or mineral elements that can cause spitting,
brown staining, or premature wear of the appliance : water from clothes dryers,
scented or softened water, water from refrigerators, batteries or air conditioners,
pure distilled or demineralised water or rain water should not be used in your Tefal
iron.Also do not to use boiled, filtered or bottled water.
Warning!
Before using your iron with the steam function for the first time, we recommend
that you operate it in a horizontal position for a few moments, away from your
linen, i.e. press the Shot of Steam button a few times.
During the first few uses, a harmless odour and smoke may be given off.
This has no effect on the use of the iron and will disappear quickly.
Warning ! Remove any labels from the soleplate
before heating up the iron (depending on model).