Telex 4030 Install Manual
Download User instructions of Telex 4030 Intercom System for Free or View it Online on All-Guides.com.
Brand: Telex
Category: Intercom System
Type: User instructions
Model: Telex 4030 , Telex 4030-M
Pages: 2 (0.46 Mb)
1
2
9050-7489-001 Rev. A, 1/01
USER INSTRUCTIONS
IFB 4030-M
HEADSET
LINES
1
2
3
Description
The IFB 4030-M is a passive beltpack intended for use with Telex digital matrix intercom sys-
tems.
1. Controls headset/earset output audio level.
2. ¼” Monaural headset/earset output.
3. XLR-3F Balanced input.
Installation
1. Connect the beltpack to an unused intercom system port (see cable diagram below).
2. Configure the unused intercom system port (via ADAM or Zeus Edit) for IFB.
3. Set the port output level (via |System| |Gains| |Analog Input/Ouput Gains|) to -4 dB
4. Send the changes to the intercom.
5. Connect the headset/earset to the unit.
12
7
8
3
Matrix Connector
DE-9 Female
N.C.
4030-M Connector
XLR-3 Male
IFB 4030-M to Intercom Cable Diagram