• Home
• Brands
• Escient Manuals
• Escient Fireball MX-111
• Escient Fireball MX-111 Quick Setup

Escient Fireball MX-111 Quick Setup

Download Quick setup of Escient Fireball MX-111 DVD Player for Free or View it Online on All-Guides.com.

1

2

Escient

6640 Intech Blvd., Indianapolis, Indiana 46278

Phone: 800-372-4368 Press "3” For Support

Hours: Monday - Friday 9:00am - 7pm EST

Fax: 317-616-6790

www.escient.com

Email: [email protected]

Document Number: M42001-01A4

Feb 2007

Digital Media Manager

MX-531 / 311 / 111

Quick Setup

1. Unpack Your New FireBall Media Manager

• Unpack the FireBall, cables, and accessories (save the box).

• Install the included batteries into the remote.

• Make note of the serial number (located on the back).

SERIAL NUMBER:

2. Connect FireBall to your Home Theater

A) Locate the included composite video and analog audio cables.

B) Connect FireBall to the "DVD" or other available A/V input on your receiver or TV.

Note: You may use optional s-video or component video cables and optional digital audio cables

for the best picture and sound quality. This is also applicable to the next step, connecting

changers to your FireBall. Contact your Escient dealer for more information.

3. Connect Changers to your FireBall

A) Locate the composite video and analog audio cables included with your changer.

B) Connect the composite video output from the first changer to the composite video input 1 on

FireBall.

C) Connect the analog audio cables from the first changer to the LEFT and RIGHT inputs

of the first analog audio input on FireBall.

D) Locate the included RS-232 serial cable.

E) Connect the RS-232 serial cable from the first changer to COM port 1 on FireBall.

F) Repeat steps A-E for each additional changer using video, audio, and COM ports number 2

and 3 on FireBall (Not Applicable for the MX-111 and MX-311).

4. Connect FireBall to the Internet

Note: FireBall requires an Internet connection to identify the discs in the front panel drive and

connected changers, to play Internet radio stations, and for general system maintenance.

• If you have a broadband (cable, DSL, ISDN) Internet Service Provider, connect the

included ethernet cable from FireBall's ethernet jack to your ethernet network.

• If you have a Dialup Internet Service Provider, you’ll need to configure Internet connection

sharing on a PC to the phoneline.

Note: You may need to purchase additional network hardware such as a "router".

Please contact your Escient dealer for more information.

5. Power Up!

• Plug each changer into an AC outlet.

• Plug FireBall into an AC outlet.

• The Standby LED on the front of the FireBall will begin to flash RED during the

power on cycle. When the LED turns solid RED, the FireBall is ready for use.

• Press the power button on the front panel or on the remote control. The LED

will turn solid BLUE and video will be displayed on the TV when the unit is on.

Note: You may have to press the "FB1" button on the remote to configure it to control FireBall.

Also be sure the TV and receiver are turned on and set to the correct FireBall input.

6. Quick Start

• Use the remote control and follow the on-screen instructions.

CHANGER CONNECTION

RECEIVER CONNECTION

DISPLAY CONNECTION

GENERAL CONNECTION

MX-311 & MX-111

MX-531