• Home
• Brands
• Therma-Tru Manuals
• Therma-Tru Double-door
• Therma-Tru Double-door Specification Sheet

Therma-Tru Double-door Specification Sheet

Download Specifications of Therma-Tru Double-door Door for Free or View it Online on All-Guides.com.

1

2

3

4

5

SPEC

Door System

Specifications

DOOR PANELS

OPTIONAL

FACTORY-GLAZED

GLASS OR GLASS

INSERTS

GASKETING,

WEATHERSTRIPPING

HINGES, STRIKES

FRAMES

SILL, SWING-IN, SWING

OUT, SIDELITE OPTIONS

TRANSOM OPTIONS

⎠

Classic-Craft Door System Specifications

OPTIONAL

DECORATIVE PANELS

Faces: 3/32-inch minimum thickness, molded from proprietary thermoset composite,

wood-grained to duplicate hand-crafted red oak master, stainable and paintable. Door

edges: machinable kiln-dried clear northern red oak, flush and square with door faces,

lock edge reinforced with full-length 3-1/2-inch wide engineered lumber core. Door

bottom edge: moisture-proof and decay-proof composite. Core: foamed-in-place

polyurethane, CFC-free, density 2.0 pcf minimum, K-factor of 0.15 for minimum

thermal transmittance. Standard factory sizes may be edge trimmed or end trimmed in

shop or field to suit replacement door size requirements.

Factory-glazed (available in sidelites):

Inserts (lites):

perimeter moldings flush with skin and made as

integral part of skin, molding details match door panel moldings. Glass: minimum 1/8-

inch tempered, two thicknesses with sealed airspace between, air-space typically 1/2-

inch. Options for leaded decorative glass triple-glazed in airspace between tempered

glass faces with solid brass or zinc caming. Etched glass options. Optional removable

red oak wood grilles.

perimeter frames in raised-molding patterns, composite frame moldings

wood grained to match door faces, with molding patterns complementing raised panel

moldings, stainable or paintable, screw-fastened to doors, screw holes concealed with

grain-matched plugs in matching material and finish. Glass: minimum 1/8-inch

tempered, two thicknesses with sealed airspace between, airspace typically 1/2-inch.

Options for leaded decorative glass triple-glazed in air space between tempered glass

faces with solid brass caming. Options for etched glass. Optional removable red oak

wood grilles.

Molded from fiberglass-reinforced thermoset composite, wood grained to match door

faces, stainable or paintable, fastened with very high bond tape.

Swing-in models: , press-fit in kerfs at jamb stops in

frames. Extruded thermoplastic elastomer, finned and chambered design, press-fit into

bottom edge of doors. Corner pads at bottom margin corners from jacketed thermoset

closed-cell foam.

jacketed thermoset closed-cell foam

Steel, zinc-plated, brass finish. Optional solid brass hinges. Screws plated and finished

to match hardware. Minimum hinge size 4x4x.098 inches. Strikes are proprietary

adjustable type, permitting in-out adjustment of door in frame, up to 3/16 inch.

Milled from 5/4 kiln-dried pine, profiled with 1/2-inch stop, minimum depth 4-9/16

inches. Other frame depths available to match wall constructions. Exterior casing

brickmould in WM180 pattern available. Optional frames in clear northern red oak or

exterior grade red oak wrap over pine with matching brickmould. Optional maintenance-

free clad frames and brickmoulds in prefinished white color.

Wide range of sill options:

Double-door models:

Sidelite options:

thermally-broken fixed, adjustable with oak threshold, in

“monumental” grade with decay proof composite substrate, available bronze and brass

finishes, other sills available in swing-in, swing-out, aluminum, brass or bronze anodized

finish.

double door in 6/8 height available with both leaves active and

locking astragal available, astragal faces in clear northern red oak to match door.

flush-glazed lite models, raised molding models and raised panel

models with glass moldings to match door panel moldings, in 12-inch and 14-inch

widths. Sidelite systems available with mullions separating doors from sidelites, and

continuous sills and frame head, or as separately framed and cased units joined together.

Transom frames, either rectangular or elliptical, match door frames and have matching

exterior brickmould. Transom frames in primed pine or clear northern red oak to match

door frame option. Clear insulated glass, etched glass or with decorative leaded glass,

detailed with solid brass or zinc caming.

Issued: Oct 2008