Alto AU-800R Owner's Manual

Download Owner's manual of Alto AU-800H Series Microphone, Microphone system for Free or View it Online on All-Guides.com.

Brand: Alto

Category: Microphone , Microphone system

Type: Owner's manual

Model: Alto AU-800H Series , Alto AU-800P Series , Alto AU-800R Series

Pages: 22 (0.81 Mb)

Download Alto AU-800H Series Owner's manual

Alto AU-800H Series Owner's manual - Page 1

1

Alto AU-800H Series Owner's manual - Page 2

2

Alto AU-800H Series Owner's manual - Page 3

3

Alto AU-800H Series Owner's manual - Page 4

4

Alto AU-800H Series Owner's manual - Page 5

5

Alto AU-800H Series Owner's manual - Page 6

6

Alto AU-800H Series Owner's manual - Page 7

7

Alto AU-800H Series Owner's manual - Page 8

8

Alto AU-800H Series Owner's manual - Page 9

9

Alto AU-800H Series Owner's manual - Page 10

10

Alto AU-800H Series Owner's manual - Page 11

11

Alto AU-800H Series Owner's manual - Page 12

12

Alto AU-800H Series Owner's manual - Page 13

13

Alto AU-800H Series Owner's manual - Page 14

14

Alto AU-800H Series Owner's manual - Page 15

15

Alto AU-800H Series Owner's manual - Page 16

16

Alto AU-800H Series Owner's manual - Page 17

17

Alto AU-800H Series Owner's manual - Page 18

18

Alto AU-800H Series Owner's manual - Page 19

19

Alto AU-800H Series Owner's manual - Page 20

20

Alto AU-800H Series Owner's manual - Page 21

21

Alto AU-800H Series Owner's manual - Page 22

22

If you press this key for a few seconds, your Transmitter will be switched

ON or OFF. Once you have switched the unit ON, just press this key again

slightly and you can edit various parameters such as CHANNEL, GROUP,

RF POWER LEVEL and LOCK/UNLOCK. Once you are in the LOCK position

no further operation is allowed. And in a few seconds, the display will show

the current selected (in MHZ). Battery level will also be shown.frequency

Once you are in operation mode, you can access this key to edit certain

parameters. Press this key for a few seconds and the unit will enter in the

MUTE mode. (In this way, you can tell your Bass Player what you think about

the Sound Engineer without everybody knowing that!). Press it again for a few

seconds and you will unmute the unit.

This nice blue LCD will indicate the current operation status.

This connector is used to connect the unit with the clip microphones. for

example, HM-38 condenser microphone .or LM-10 clip microphone

With the rechargeable batteries put inside, use the charger supplied to

recharge the batteries.

This unit may be powered from one pair dry or rechargeable batteries,

Um3 size AA 1.5V.

Pin 2,

Pin 4, for Dynamic or Condenser microphone

Pin 3, for Guitar, bass and keyboards

Pin 1, GND

It is a flexible antenna. To get effective transmission, never cover the

antenna with hand, clothes, etc. during operation, and always position

the transmitter nearby the receiver.

It is the detachable belt clip for easy carry during the live applications.

3. CONTROL ELEMENTS

SPOTLIGHT

1 LCD Display

2 CH/ON Key

3 SELECT Key

4 Mini 4P Connector

5ChargeJack

6 Battery Compartment

7

7 Belt Clip

8 Antenna

Phantom power supply for Condenser microphone

(1)

(4)

(3)

(2)