Amana Hardwire Junction Kit Installation Instructions

Download Installation instructions of Amana Hardwire Junction Kit Kitchen Appliances for Free or View it Online on All-Guides.com.

Brand: Amana

Category: Kitchen Appliances

Type: Installation instructions for Amana Hardwire Junction Kit

Pages: 3 (0.11 Mb)

Download Amana Hardwire Junction Kit Installation instructions

Amana Hardwire Junction Kit Installation instructions - Page 1
1
Amana Hardwire Junction Kit Installation instructions - Page 2
2
Amana Hardwire Junction Kit Installation instructions - Page 3
3
11113901
Installation Instructions
As a professional installer you have an obligation to
know the product better than the customer. This in-
cludes all safety precautions and related items.
Prior to actual installation, thoroughly familiarize your-
self with this Instruction Manual. Pay special atten-
tion to all safety warnings. Often during installation or
repair it is possible to place yourself in a position
which is more hazardous than when the unit is in
operation.
Remember, it is your responsibility to install the
product safely and to know it well enough to be able
to instruct a customer in its safe use.
Safety is a matter of common sense...a matter of
thinking before acting. Most dealers have a list of
specific good safety practices...follow them.
The precautions listed in this Installation Manual
should not supersede existing practices but should
be considered as supplemental information.
ATTENTION INSTALLING PERSONNEL
RECOGNIZE THIS SYMBOL AS A SAFETY PRECAUTION
Hardwire
Junction Kit
Description
Hardwire Junction Box (Direct Wire Sub-Base)
The hardwire junction box kit is used to direct wire the
unit when it is not desirable to use the standard unit
subbase or the unit power cord. The junction box
provides a protected enclosure for electrical connec-
tions as required by some electrical codes.
The hardwire junction box is intended to be mounted
on the floor or the adjacent wall.
The junction box is furnished with approximately 2-1/2
feet of 1/2 inch flexible steel conduit and a metal box for
securing the conduit to the unit cabinet at the incoming
power opening.
An optional 230/208V or 265V power switch assembly
is available for use with the hardwire junction box or
subbase. The switch provides a POWER ON/OFF func-
tion at the unit as required by some electrical codes. A
replacement junction box cover plate is provided with
each switch kit. For additional information, refer to the
Power Switch Installation Instructions.
Junction Box Kit Installation and
Wiring Procedure
The installation and servicing of this equipment should
be performed by qualified, experienced technicians.
Electrical connections at the unit must be made after
the unit chassis is installed in the wall sleeve.
The installer must determine and supply the mounting
components for attaching the junction box to the wall or
floor.
WARNING
To avoid death, personal injury or prop-
erty damage due to electrical shock, dis-
connect the electrical power source be-
fore installing this kit. The unit OFF
switch does not disconnect all electri-
cal power to this unit.
Effective: November 1995 (1)
Amana
Fayetteville, TN 37334