Toa BG-10 Specifications

Download Specifications of Toa BG-10 Amplifier for Free or View it Online on All-Guides.com.

Brand: Toa

Category: Amplifier

Type: Specifications for Toa BG-10

Pages: 2 (0.14 Mb)

Download Toa BG-10 Specifications

Toa BG-10 Specifications - Page 1
1
Toa BG-10 Specifications - Page 2
2
TOA 900 SERIES
ALL-PURPOSE AMPLIFIER (10-WATT)
BG-10
Features
1. 2-channel mixer power amplifier
2. Output power; 10 watts RMS
3. Wide frequency response; 50 to 20,000Hz, ± 1dB
4. Low distortion and noise level
5. Bass and treble controls on Program Input
6. Built-in muting circuit
7. Balanced Mic/Telephone page Input and Program
Input
8. Mic/Telephone page Input (Switchable)
9. Self-protecting circuitry design
10. 4 different output impedances; 4 and 8 ohms, 25
and 70 volts
11. Compact and light weight
12. Desk top or rack-mounted type
Description
The TOA BG-10 Mixer Power Amplifier controls and
mixes up to two independent input signals. Capable of
delivering 10 watts rms, the BG-10 has ideal flexibility for
small sound reinforcement systems. Any microphone of
impedance of less than 600 ohms can be connected to
the microphone input of the BG-10.
Changing over a selector switch turns this microphone
input into the Telephone page input, and allow the
BG-10 to be used as an amplifier for the page made
from the telephone. The program input of the BG-10
has a built-in I0k-ohm matching transformer and so,
can accept the balanced or unbalanced line.
The BG-10 incorporates the electronic muting circuit.
This permits quiet alternate-action muting of the
microphone or Telephone page and program input.
When short-circuited between the Mute and Ground
terminals, the microphone or Telephone page input
overrides the program input.
For the program input, independent Bass and Treble
controls of boost/attenuation system are provided on
the rear panel.
The BG-10 has transformer-isolated output terminals
for connection to 4 or 8-ohm speaker systems, or for
25-volt or 70-volt line distribution.
The BG-10 is mountable in an equipment rack using
optional rack mounting brackets model MB-922 or
MB-921A.