Fluke PV350 Introduction Manual
Download Introduction manual of Fluke PV350 Control Unit, Transducer for Free or View it Online on All-Guides.com.
Brand: Fluke
Category: Control Unit , Transducer
Type: Introduction manual for Fluke PV350
Pages: 8 (0.19 Mb)
1
2
3
4
5
6
7
8
PV350 English Instruction Sheet
Page 1
®
PV350
Pressure/ Vacuum Transducer Module
PV350
PRESSURE / VACUUM MODULE
cmHg
inHg
kPa
psi
OFF
M
ET
R
IC
E
N
G
L
IS
H
Z
E
Instruction Sheet
Introduction
The PV350 Pressure/Vacuum Transducer Module (the module)
measures gauge pressure; the difference between atmospheric
(barometric) pressure and the pressure (or vacuum) applied to the
pressure port on the transducer. It then converts that measurement to 1
mV dc per unit. A module and a high-performance digital multimeter
(DMM) with min/max function become a datalogger capable of measuring
peak high and peak low.
Box Contents
• Pressure/Vacuum Transducer Module
• 1/4 in. male flare to 1/4 in. female pipe thread connector
• 9 V battery
• Instruction Sheet
• Quick Reference Guide
Safety Information
WWarning
To avoid eye injury, always wear approved safety glasses
when working with this instrument.
To avoid injury from pressure explosion:
• Be sure that pressure is removed before
disconnecting any hoses or tubing from the PV350
transducer.
• Follow accepted safety procedures for systems on
which pressure or vacuum measurements are made.
• Make sure the PV350 is serviced by a qualified
technician.
• Complies with safety standard EN/IEC 61010.
PN 926873 May 1992 Rev. 5, 1/07
© 1999-2007 Fluke Corporation, All rights reserved. Printed in U.S.A.
All product names are trademarks of their respective companies.